This section requires obstacles to not exceed 1/2 inch in height measured vertically to the highest point....
Search Results "Adjustable Height Exam Table"
-
1017.5 Tread Obstacles
-
Re: Section 307 Protruding Objects
object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf mounted at the (required) height...
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
general agreement that the real use of these supports is for positioning, and thus, not meant to support the full weight of the patient or to keep a patient in a standing position during the exam...
-
Standing Supports [M305.2]
general agreement that the real use of these supports is for positioning, and thus, not meant to support the full weight of the patient or to keep a patient in a standing position during the exam...
-
3.1.3. Growth Rate of Auditoriums
Table 3-4 shows the average annual growth by such movie theaters from 2010 to 2014. ...
-
704.5 Fire-resistance rating
Exterior walls shall be fire-resistance rated in accordance with Tables 601 and 602....
-
Alterations and Additions
Resurfacing or resealing and projects that add new parking spaces constitute alterations (or additions) and must include accessible spaces as required in the scoping table. ...
-
§ 38.111(a)(4)
, on each side of the car from which passengers board, complying with §38.113, a restroom complying with §38.123, and at least one space complying with §38.125(d)(2) and (3) to provide table...
-
Aquatic Access Pool Lift IGAT-180/135
Height of the lift in raised position varies up to 7'1"....
-
On-Board Wheelchairs
On-Board Wheelchairs When required, on-board wheelchairs must be equipped with specific features and be designed to be compatible with the maneuvering space, aisle width, and seat height...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
306.3.4 Clearance Reduction
inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches (150 mm) in height...
-
[A] PUBLIC WAY
of land open to the outside air leading to a street, that has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width and height...
-
Curbs [4.21.7]
This height limit also allows wheelchair footrests to clear the curb so that a person using a wheelchair can partially pull into the stall for transfer to the seat....
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
Boat Slips
Where boat slips are provided, the number of boat slips required to be accessible must comply with the table shown to the right....
-
4.2.1. Low Accessibility Baseline
Table 4-10 summarizes the cost impact of using the Low Accessibility baseline in the analysis. ...
-
11B-228.3.2.1 Public use or common use EVCS
Where EVCS are provided for public use or common use, EVCS complying with Section 11B-812 shall be provided in accordance with Table 11B-228.3.2.1....
-
Performance for Surface Firmness and Stability
Table 3....
-
Service Counters
If we look at 11B-904.4.1, we see that a 36” minimum long section of the counter needs to be installed at 34” maximum height. ...
-
2. Equipment Clearances for Breast Platforms
The manufacturer also raised concerns with the size of the knee and toe clearance and recommended basing the requirements in relation to the height of the breast platform....
-
Public Way
open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width and height...
-
106.5.51 Public Way
open to the outside air leading to a public street, which has been deeded, dedicated or otherwise permanently appropriated to the public for public use and which has a clear width and height...
-
R408.2 Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 100 mm (4 in) high minimum and 180 mm (7 in) high maximum....
