R410.7 Height from Finish Surface. Visual characters shall be 1.0 m (3.25 ft) minimum above the finish surface....
Search Results "Ramp Surface"
Filters
Commonly Searched Documents
-
R410.7 Height from Finish Surface
-
What values are recommended for ground and floor surfaces along an accessible route?
What values are recommended for ground and floor surfaces along an accessible route?...
-
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.115V Informational Video
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.115V Informational Video...
-
Accessible Routes Adjacent to the Playing Surface
Accessible Routes Adjacent to the Playing Surface If the accessible route is adjacent to the playing surface, it must not exceed 36 inches from any area where golf balls rest....
-
11B-812.9 Surface marking
EVCS vehicle spaces shall provide surface marking stating “EV CHARGING ONLY” in letters 12 inches (305 mm) high minimum....
-
11B-812.9 Surface marking
EVCS vehicle spaces shall provide surface marking stating “EV CHARGING ONLY” in letters 12 inches (305 mm) high minimum....
-
Curb Ramps
[See subsections ...]
-
Armor-Tile Tactile Systems Surface Applied Systems Installation Video
This is a video demonstrating how to install a single Armor Tile surface-applied tile....
-
Energy Requirements for Different Surfaces
Energy Requirements for Different Surfaces The energy consumption results are shown in the following table and figures. Table 4....
-
(d) Outside surface at entry door
The final Guidelines also provide that at the primary entry door to a dwelling units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete...
-
Digital Wheelchair Scale With Dual Ramps And Extra-Large Platform, Certified for ADA Compliance, KG Only
The 2620KG ADA Compliant Digital Wheelchair Scale features dual ramps, an extra-large 32” x 40” platform, and 2” edge guards for enhanced safety and accessibility....
-
§27.75(a)(3) Pedestrian over-passes, under-passes and ramps.
(3) Pedestrian over-passes, under-passes and ramps....
-
Figure M4: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and M304 Diagnostic Equipment for Use by a Patient in a Standing Position (Weight Scale Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. The weight scale is usable by both people who are...
-
Figure 406.2 Counter Slope of Surface Adjacent to Curb Ramps – Drawing from the U.S. Access Board
-
11B-705.1.1.4 Resiliency
Detectable warning surfaces shall differ from adjoining surfaces in resiliency or sound-on-cane contact....
-
What surface characteristics are required of an accessible route?
What surface characteristics are required of an accessible route?...
-
§ 37.42(c)
(c) For new or altered stations serving commuter, intercity, or high-speed rail lines or systems, in which track passing through the station and adjacent to platforms is shared with...
-
§ 37.42(c)
(c) For new or altered stations serving commuter, intercity, or high-speed rail lines or systems, in which track passing through the station and adjacent to platforms is shared with...
-
Section 37.42
shared with existing freight rail operations, passenger railroads that do not choose to provide level-entry boarding may, after obtaining FRA and/or FTA approval, use car-borne lifts, ramps...
-
5.3 Transfer Sides
5.3 Transfer Sides.
-
5.3 Transfer Sides Recommendations
5.3 Transfer Sides Recommendations
-
5.4.9 Interruptions Along Transfer Support Gripping for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.9 Interruptions Along Transfer Support Gripping for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position. The bottom of the transfer support shall have no...
