The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function....
Search Results "Door Height"
Filters
Commonly Searched Documents
-
Sargent 8888 Reversible Rim Exit Device
-
HEWI Panic Bar EN 1125
Special solutions for exit doors must enable fast escape in an emergency....
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
-
TownSteel TRXL Grade 1 Cylindrical Lock with Ligature Resistant Trim
It fits standard 161 door prep....
-
Eye Height
Table 7 shows that the mean eye height for bicyclists in this study was 157 cm (62 inches). The 85th percentile eye height for bicyclists was 150 cm (59 inches)....
-
Corbin Russwin Inc. ED5000 Series Exit Device
Aesthetics Over the past 100 years, Corbin Russwin has been well-known for weaving pleasing aesthetics and inventive designs into architectural door hardware, and today’s wide stile exit...
-
Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
Certifications ANSI/BHMA A156.3 Series Grade 1 UL/cUL listed (3-hours) for "A" label single door applications (4' x 8') UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Pressure...
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Allegion Falcon 1990 Series Cross Bar Exit Devices
: Hex dogging standard Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7' door...
-
DORMA 8000 Series Exit Device
For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors....
-
704.4.1 Height
Advisory 704.4.1 Height....
-
704.4.1 Height
Advisory 704.4.1 Height....
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Allegion Von Duprin 33A/35A Series Exit Devices
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1....
-
Clear Floor and Turning Space Inside Examination Rooms
Clear floor space is needed along at least one side of an adjustable height examination table....
-
1009.5.3 Height
The height of the transfer platform shall comply with 1009.4.2....
-
1009.5.3 Height
The height of the transfer platform shall comply with 1009.4.2....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Road Closure Drawings
Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
TownSteel TS8000 Grade 2 Fire Rim Device
SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48"...
