In the 2016 Non-Rail Vehicle Guidelines, passenger access routes (which were referred to as “accessible circulation paths” in the proposed rule) must provide clearances sufficient to...
Search Results "Door Height"
-
T503 Passenger Access Routes
-
F. Chapter 5: Doorways, Circulation Paths, and Fare Collection Devices
Chapter 5 in the 2016 Non-Rail Vehicle Guidelines contains the technical requirements for doorways, illumination at doorways and boarding and alighting areas, passenger access...
-
4.1.6(4)(e)
(e) Toilet rooms. Where alterations to existing facilities make strict compliance with 4.22 and 4.23 structurally impracticable, the addition of one "unisex" toilet per floor...
-
11B-233.3.1.2.5 Public housing facility site impracticality
Doors complying with Section 11B-404. 3. Communication features complying with Section 11B-809.5.5. 4. ...
-
Cal-Royal Legacy Series Locksets
Square corner face plate and 5" round corner backsets optional Option 3 Hour Fire Rated UL Listed Latch ANSI Standard A156.2 Grade 3 Fits 1-3/8" to 1-3/4" wood or metal doors Round...
-
PART 4: ACCESSIBLE MEDICAL EQUIPMENT
Such equipment includes adjustable-height exam tables and chairs, wheelchair-accessible scales, adjustable-height radiologic equipment, portable floor and overhead track lifts, and gurneys...
-
TownSteel CDC-110 Classroom Instruder Mechanical Cylindrical
Turning inside lever any time opens the door....
-
Figure 404.2.4.1(c) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Stanley QME 100 Series Grade 1 Heavy Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
Stanley QMS 100 Series Grade 1 Heavy-Duty Mortise Locks
Pre-assembled trims with spring-loaded spindles automatically adjust to door thickness and reduce installation time. Partial security separator prevents spindle manipulation....
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
Allegion Falcon 1790 Series Exit Devices
: 1 3/4" thick metal or wood, specify if wood door Projections: 3 3/8" in neutral position, 2 3/8" in dogged position....
-
TownSteel CSRC Series, Grade 2, Clutched, Conical Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
TownSteel CB Series, Grade 2 Non-Clutched Flat Rose Cylindrical Locks
Specification: Door Thickness 1-3/8”-2” (35mm-51mm) Backset 2-3/4” standard. 2-3/8”, 3-3/4” and 5” optional Strike ASA Strike standard, T-Strike Optional Latch bolt Stainless steel...
-
11B-707.7.2 Characters
Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I". Characters shall contrast...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
T702 Signs
[See subsections ...]
-
4.1.3(16)(a)
(a) Signs which designate permanent rooms and spaces shall comply with 4.30.1, 4.30.4, 4.30.5 and 4.30.6.
-
Figure M2: M301.4 Lift Compatibility
(at Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position)
-
M301.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight. Inside handrails on switchback or...
-
11B-707.7.2 Characters
11B-707.7.2 Characters. Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I"....
