Section 407.2.2.2 covers the current ADA Standards for elevator visible signals.
Search Results "Load and Unload Area"
Filters
Commonly Searched Documents
-
Visible Signals: ADA Standard Section 407.2.2.2
-
2.8 Aircraft and Air Carrier Facility Accessibility.
It is the airport’s responsibility to ensure that a passenger with a disability can move through the airport to the aircraft boarding area. (49 CFR § 27.71(c)). 2.8.1.2 Shared-use automated...
-
11B-403.5.1 Clear width
The clear width for walking surfaces in corridors serving an occupant load of 10 or more shall be 44 inches (1118 mm) minimum....
-
Amusement Ride
A system that moves persons through a fixed course within a defined area for the purpose of amusement....
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
-
Shooting Facilities
., muzzle loading rifle, small bore rifle, high power rifle, bull’s eye pistol, action pistol, silhouette, trap, skeet, and archery)....
-
Compliance requirements
facilities, tables, counters, and benches), pedestrian signs, transit stops and transit shelters for buses and light rail vehicles, on-street parking that is marked or metered, and passenger loading...
-
4.3.2 LOCATION
(1) At least one accessible route within the boundary of the site shall be provided from public transportation stops, accessible parking, and accessible passenger loading zones, and public...
-
11B-219.5 Permanent and portable systems
Permanently installed assistive-listening systems are required in areas if (1) they accommodate at least 50 persons or if they have audio-amplification systems, and (2) they have fixed seating...
-
11B-206.2.4 Spaces and elements
Accessible routes must connect all spaces and elements required to be accessible including, but not limited to, raised areas and speaker platforms. ◼ Exceptions: 1. Reserved....
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
-
11B-216.10 Assistive listening systems
Each assembly area required by Section 11B-219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system....
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
Disability and Employment Resources: SCVRD Part 1
Longevity After Injury Project interview Kelly Sieling, Charleston Area Supervisor of South Carolina Vocational Rehabilitation Department, about issues related to assistance and maintenance...
-
Lines of Sight: ADA Standard Section 802.2
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with 802.2....
-
AMUSEMENT RIDE
[DSA-AC] A system that moves persons through a fixed course within a defined area for the purpose of amusement....
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
Seats
In the raised (load) position, the centerline of the seat must be located over the deck, a minimum of 16 inches from the edge of the pool....
-
DIVISION 5: GENERAL SITE AND BUILDING ELEMENTS
DIVISION 5: GENERAL SITE AND BUILDING ELEMENTS 11B-501 General 11B-502 Parking Spaces 11B-503 Passenger Drop-Off and Loading...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...