Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
Search Results "Check Writing Surface"
-
11B-603.3 Mirrors
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
Place of lodging
and reservations desk, (ii) Rooms available on a walk-up basis, (iii) Linen service, and (iv) Accepting reservations for a room type without guaranteeing a particular unit or room until check-in...
-
Examples of Involvement
Review draft of county department of mental health contract with private providers to check that ADA obligations are part of the contract....
-
4.13.12* AUTOMATIC DOORS AND POWER-ASSISTED DOORS
Such doors shall not open to back check faster than 3 seconds and shall require no more than 15 lbf (66.6N) to stop door movement....
-
Egress Signage
216.8 Toilet Rooms and Bathing Rooms (from 213.2.2 and 213.2, Exception 4) 216.9 TTYs (from 217.4.9) 216.10 Assistive Listening Systems (from 219.4) 216.11 Check-Out...
-
Introduction and Instructions
Health Plan professionals can use these checklists to check if their policies and procedures, as well as the training they offer is inclusive of these access elements....
-
Height: ADA Standard Section 903.5
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
AJW Architectural Products U115 32 oz. Stainless Steel Powder Soap Dispenser - Surface Mounted
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 32 oz of powder soap Product Specs Tank: Fabricated corrosion resistant stainless...
-
AJW Architectural Products U133 56 oz. One-Piece Liquid Soap Dispenser - Surface Mounted
Product Features Fabricated of #20 gauge stainless steel with #4 satin finish A refill indicator displays remaining product Secured with pin tumbler lock, keyed like all AJW...
-
AJW Architectural Products U199 Series Lever Operated, ABS Roll Towel Dispenser - Surface Mounted
Product Features Holds one standard size roll up to 8" in diameter Lever-operation complies with ADA code Secured with pin tumbler lock, keyed like all AJW...
-
AJW Architectural Products U1512EA High Speed Automatic 120 Volt Hand Dryer - Surface Mounted
Product Features Cover is fabricated of formed steel alloy for strength Hands free electric sensor provides easy operation Adjustable 12,000-18,000 RPM motor Dryers come...
-
Gamco Surface-Mounted Vertical Tank Type Soap Dispenser with All-Purpose Valve - G-16AP
Description Fabricated of 22-gauge (.759mm) type 304 satin finished stainless steel. Body of dispenser is welded to back panel. View level indicator is clear plastic. Valve is...
-
Gamco Surface Mounted Horizontal Tank Type Soap Dispenser with All-Purpose Valve - G-58AP
Description Stainless steel tank-type soap dispensers have 40-fl oz. (1.2-L) capacity. Units are easily filled from top through locked opening. Satin-finished 22-gauge (.759mm)...
-
AJW Architectural Products U109 16 oz. Plastic Bulb Liquid Soap Dispenser - Surface Mounted
Product Features Easily operated with one hand Globe is tanslucent, shatterproof and corrosion resistant molded polyethylene Holds 16 oz. of liquid soap or hand...
-
E202.6.1 Required Documentation (Section-by-Section Analysis)
E202.6.1 Required Documentation (Section-by-Section Analysis) This section proposes to require that agencies document in writing the basis for determining that ICT fully conforming to...
-
IX. Complaints
Complaints should be in writing, signed by the complainant or an authorized representative, and should contain the complainant'sname [sic] and address and describe the public entity's alleged...
-
15(c)
The United States shall respond in writing to HWI’s proposed remediation within 60 days for each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel....
-
American Specialties Roval™ Collection Surface Mounted Seat Cover Dispenser Model 20477-SM
Requires the Premium User plan or above. (Login or upgrade your account!) -
Figure 406.2 Counter Slope of Surface Adjacent to Curb Ramps – Drawing from the U.S. Access Board
