A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
Search Results "Check Writing Surface"
-
RAMP
-
G2
[ADA Standards §§ 4.1.3(1), 4.3.8] Note: Although the facility survey cannot check the accessibility of the cots because they will not be installed until the shelter is in use, planning...
-
382.57 What services must carriers provide if their automated kiosks are inaccessible?
For example, a passenger who cannot use the kiosk could be allowed to come to the front of the line at the check-in counter, or carrier personnel could meet the passenger at the kiosk and...
-
How the ADA Standards are Enforced
Nor are building departments required or authorized by the ADA to enforce the ADA Standards (some building departments even include a disclaimer on their plan checks indicating that ADA...
-
MONETARY RELIEF
PPD will provide written notification to the United States of each payment, including a copy of the check. The total amount paid by PPD will be no more than $97,500....
-
R409.4 Height
Top of gripping surfaces of handrails shall be 865 mm (2.8 ft) minimum and 965 mm (3.2 ft) maximum vertically above walking surfaces, ramp surfaces, and stair nosings....
-
SmartCells Flooring: Infection Control Demonstration
For more info check out http://www.smartcellsusa.com/fallprot......
-
Microsoft Word Accessibility Basics: Webinar Series Archive
July 20th: Accessibility Full Check and Conversion to PDF This webinar will focus on using the Microsoft Word 2016 Accessibility Full Check feature and interpreting the results of the...
-
11B-705.1.1.3.2
11B-705.1.1.3.2 Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....
-
Size: ADA Standard Section 1008.3.2.1
Transfer steps shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
Transfer Height: ADA Standard Section 1002.6.2
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
AJW Architectural Products U155 24 oz. Vertical Liquid Soap Dispenser - Surface Mounted
Product Features Globe is translucent, shatterproof and corrosion resistant molded polyethylene Fabricated of highly polished chrome plated ABS material Holds 24 oz. of...
-
AJW Architectural Products U169 Series Lever Operated, Roll Towel Dispenser - Surface Mounted
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds one standard size roll up to 8" in diameter Secured with pin tumbler lock, keyed like...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
11B-812.8.7 Location
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign....
-
11B-812.8.7 Location
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign....
-
Size: ADA Standard Section 1008.3.1.1
Transfer platforms shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Strenuous objections were raised by some business commenters to the proposed provisions of the guidelines concerning check-out aisles, counters, and scoping for hotels and nursing facilities...