Section 810.5.3 This section concerns coordination between rail platforms and rail vehicles....
Search Results "Vehicle"
Commonly Searched Documents
-
Section 810.5.3
-
11B-812.9 Surface marking
EVCS vehicle spaces shall provide surface marking stating “EV CHARGING ONLY” in letters 12 inches (305 mm) high minimum....
-
Changes in Level and Horizontal Gaps
The referenced vehicle guidelines (like those of the proposed rule) permit the use of mini high platforms, car-borne or platform-mounted lifts, ramps or bridge plates, or manually deployed...
-
Can a disabled non-EV driver park in an ADA EVSE spot?
RESPONSE: The California Vehicle Code prohibits parking a vehicle in an EVCS. Vehicles left in EVCS spaces must be connected for charging purposes....
-
810.5.3 Platform and Vehicle Floor Coordination
810.5.3 Platform and Vehicle Floor Coordination. Station platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements of 36 CFR Part 1192....
-
§ 37.163 Keeping vehicle lifts in operative condition: Public entities
[See subsections ...]
-
Used Demand-Response Vehicles
[See subsections ...]
-
§ 37.7 Standards for accessible vehicles
[56 FR 45621, Sept. 6, 1991, as amended at 58 FR 63101, Nov. 30, 1993; 61 FR 25416, May 21, 1996]
-
What accessibility requirements apply to EV charger installation outside of California?
RESPONSE: To the extent that EVCS are a public accommodation or commercial facility they are covered by the federal law of the Americans with Disabilities Act. Specific technical...
-
Surface and Slope [1012.4 and 1012.5]
The technical requirements for the surface and slope of parking spaces for vehicles other than RVs are the same as for RV parking spaces....
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum.
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum.
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum.
-
T210 Wheelchair Spaces
Under the 2016 Non-Rail Vehicle Guidelines, large non-rail vehicles must provide at least two wheelchair spaces, and small non-rail vehicles must provide at least one wheelchair space....
-
§ 38.23(c)(2) Ramp surface
(2) Ramp surface. The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30...
-
3.1.4.1 Width of Non-RV Campsite Vehicle Parking Areas
Where the width of a vehicle parking area cannot be at least 16 feet (3960 mm) because one or more conditions for exception in section 1.1 exist, the width of the vehicle parking area may...
-
11B-228.3.2 Minimum number
Where an EV charger can simultaneously charge more than one vehicle, the number of EV chargers provided shall be considered equivalent to the number of electric vehicles that can be simultaneously...
-
Electric Vehicle Charging Stations, Accessibility: FAQs
[See subsections ...]
-
T404.2 Vehicle Floor and Boarding Platform Coordination
The design of non-rail vehicles shall be coordinated with the boarding platforms to minimize the gap between the vehicle floor and the boarding platforms....
-
National Highway Traffic Safety Administration
The introduction of new technology continues to broaden opportunities for people with disabilities to drive vehicles with adaptive devices....
-
11B-309 Operable parts
TITLE NOTES 11B-309 Operable parts Adds to existing exception for 5 lb. maximum operating force requirement for electric vehicle...
-
Access Aisle: ADA Standard Section 503.3
Section 503.3 covers the current ADA Standards for access aisle at passenger loading zones.
-
§ 37.83 Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public entities operating rapid or light rail systems
[See subsections ...]
-
§ 38.159(b)(2)(i) Requirements
The controls shall be interlocked with the vehicle brakes, transmission, or door, or shall provide other appropriate mechanisms or systems, to ensure that the vehicle cannot be moved when...