Problem Three: Entrance door threshold has an abrupt change in level of more than 1/4 inch and no beveled sides....
Search Results "Hinge Side Clearance"
Filters
Commonly Searched Documents
-
Temporary Solutions for Election Day: Accessible Entrance to Polling Place
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. ...
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
The MDE NPRM proposed requiring standing supports on each side of the standing surface of diagnostic equipment used by patients in the standing position, and compliance with the technical...
-
Clear Width [1016.3]
Consider the number of people who are likely to use the ORAR at the same time and how they will want to use it—single file or walking side-by-side....
-
4.1.3(19)(a)
space for each total seating capacity increase of 100 In addition, one percent, but not less than one, of all fixed seats shall be aisle seats with no armrests on the aisle side...
-
Wheelchair Spaces
Wheelchair Spaces Maneuvering into wheelchair spaces is often easier from the front or back than from the side, especially where they are paired....
-
1.6 Testing Site and Conditions
The four sidewalk sections were arranged side-by-side and a straight, unobstructed walking path was provided to each sidewalk. A scale drawing of the site is presented in Figure 4....
-
Diagonal Curb Ramps [§406.6]
A segment of curb at least 24” long beyond flares must be provided on both sides of curb ramps with side flares within marked crossings....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
1009.7.2 Separation
The fire-resistance-rated exterior wall construction shall extend horizontally 10 feet (3048 mm) beyond the landing on either side of the landing or equivalent fire-resistance-rated construction...
-
Section 6.0 Conclusions
Knee and toe clearances: Current U.S. standards for knee and toe clearances do not accommodate a majority of participants in our sample. 10.Maneuvering clearances: A significant proportion...
-
602 Drinking Fountains
Substantive changes to this section include: removal of references to water coolers (602.1) requiring all wheelchair accessible drinking fountains to provide knee and toe clearance...
-
Footrests and Armrests
This clearance is needed for people transferring between the lift and a mobility device....
-
Wheelchair Passage Width [4.2.1] and Passing Space [4.2.2]
Additional clearance is needed for maneuvering and sway....
-
American Specialties Roval™ Collection Surface Mounted Paper Towel Dispenser 20210
Fitted with tumbler lock and heavy-duty stainless steel staked piano hinge....
-
§382.81(d)
(d) For a passenger with a fused or immobilized leg, you must provide a bulkhead seat or other seat that provides greater legroom than other seats, on the side of an aisle that better accommodates...
-
e-iv
Are the highest floor control buttons mounted no more than 54 inches above the floor for a side reach or 48 inches for forward reach? [ADA Standards § 4.10.12 (3)] Yes No...
-
409.4.6.2 Location
Control panels shall be on a side wall, 12 inches (305 mm) minimum from any adjacent wall. Figure 409.4.6.2 Location of Private Residence Elevator Control Panel...
-
4.5.2 Clear Floor or Ground Space
The space shall be positioned for either forward or side approach to the container opening and be adjacent to or overlap the ORAR....
-
M302.3.2 Armrests
Armrests on transfer sides are not permitted to obstruct access to the transfer surface. See M302.2.3 Exception....
-
BS8300:2001 Research
They include information on space required for “kneeholes,” reaching abilities of wheeled mobility users, clear floor area space requirements and maneuvering clearances....
-
M302.2.3 Size
The size of transfer surfaces shall be measured from center points of their opposing sides....
-
4.16.5* Flush Controls
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
-
4.16.5* FLUSH CONTROLS
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
