Section 607.4.2.2 covers the current ADA Standards for grab bars on the control end of bathtubs without permanent seats.
Search Results "Shall"
-
Control End Wall: ADA Standard Section 607.4.2.2
-
Head End Wall: ADA Standard Section 607.4.2.3
Section 607.4.2.3 covers the current ADA Standards for grab bars on the head end wall of bathtubs without permanent seats.
-
11B-216.4.3 Directional signs
Signs required by Chapter 10, Section 1009.10 to provide directions to accessible means of egress shall comply with Section 11B-703.5....
-
11B-202.3.2 Extent of application
An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
-
Medical Care Facilities: ADA Standard Section 232.4
Section 232.4 covers scoping requirements in the current ADA Standards for medical care facilities.
-
11B-202.3.2 Extent of application
An alteration of an existing element, space, or area of a building or facility shall not impose a requirement for accessibility greater than required for new construction....
-
11B-247.1.2.5 Blended transitions
Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5....
-
11B-607.4.2.3 Head end wall
A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Cells with Mobility Features: ADA Standard Section 232.2.1
Section 232.2.1 covers scoping requirements in the current ADA Standards for cells with mobility features.
-
11B-247.1.2.5 Blended transitions
Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5....
-
11B-813.1 Location
Adult changing facilities shall be provided within a unisex (single-user or family) toilet room or other similar private room....
-
11B-607.4.2.3 Head end wall
A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...
-
Extent of Application: ADA Standard Section 202.3.2
Section 202.3.2 covers the extent of application of Section 202.3
-
Bathing Facilities: ADA Standard Section 213.3.6
Section 213.3.6 covers scoping requirements in the current ADA Standards for bathing facilities.
-
11B-809.10.8.2 Floor space
A floor space 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum shall be provided centered on the lavatory....
-
11B-1002.6.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
-
11B-216.4.3 Directional signs
Signs required by Chapter 10, Section 1009.10 to provide directions to accessible means of egress shall comply with Section 11B-703.5....
-
11B-1002.6.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
-
Side-Hinged Door Ovens: ADA Standard Section 804.6.5.1
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
Lines of Sight Over Seated Spectators: ADA Standard Section 802.2.1
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.1....
-
Door Swing: ADA Standard Section 803.3
Doors shall not swing into the room unless a clear floor or ground space complying with 305.3 is provided beyond the arc of the door swing....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-502.7.2 Wheel stops
A curb or wheel stop shall be provided if required to prevent encroachment of vehicles over the required clear width of adjacent accessible routes....