and the depth of the obstruction shall be 24 inches (610 mm) maximum....
Search Results "Shall"
Filters
Commonly Searched Documents
-
308.3.2 Obstructed High Reach
-
308.3.2 Obstructed High Reach
and the depth of the obstruction shall be 24 inches (610 mm) maximum....
-
11B-308.3.2 Obstructed high reach
and the depth of the obstruction shall be 24 inches (610 mm) maximum....
-
11B-308.3.2 Obstructed high reach
and the depth of the obstruction shall be 24 inches (610 mm) maximum....
-
11B-806.2.3 Sleeping areas
At least one sleeping area shall provide a 36 inch (914 mm) by 48 inch (1219 mm) minimum clear space on both sides of a bed....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
4.5.3* CARPET
If carpet or carpet tile is used on a ground or floor surface, then it shall be securely attached; have a firm cushion, pad, or backing or no cushion or pad; and have a level loop, textured...
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
-
11B-707.3 Operable parts
Operable parts shall comply with Section 11B-309....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
11B-806.2.3 Sleeping areas
At least one sleeping area shall provide a 36 inch (914 mm) by 48 inch (1219 mm) minimum clear space on both sides of a bed....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
11B-806.2.3 Sleeping areas
At least one sleeping area shall provide a 36 inch (914 mm) by 48 inch (1219 mm) minimum clear space on both sides of a bed....
-
11B-1009.2.3 Clear deck space
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer surfaces....
-
F216.10 Assistive Listening Systems
Each assembly area required by F219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system....
-
229.1 General
Where glazed openings are provided in accessible rooms or spaces for operation by occupants, at least one opening shall comply with 309....
-
307.4 Vertical Clearance
Vertical clearance shall be 80 inches (2030 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
R304.2.1 Turning Space
A turning space 1.2 m (4.0 ft) minimum by 1.2 m (4.0 ft) minimum shall be provided at the top of the curb ramp and shall be permitted to overlap other turning spaces and clear spaces....
-
R304.3.1 Turning Space
A turning space 1.2 m (4.0 ft) minimum by 1.2 m (4.0 ft) minimum shall be provided at the bottom of the curb ramp and shall be permitted to overlap other turning spaces and clear spaces....
-
229.1 General
Where glazed openings are provided in accessible rooms or spaces for operation by occupants, at least one opening shall comply with 309....