Such level changes may need to be in close proximity, such as at raised thresholds (otherwise a minimum 48” separation will provide enough wheelchair space so that only one vertical change...
Search Results "Clear Ground Space"
-
Is there a minimum distance between changes in level?
-
305 Clear Floor or Ground Space
Section 305 provides requirements for the basic space allocation for an occupied wheelchair. Few comments addressed this section, and no substantive changes have been made....
-
4. Assess During the Planning, Installation and Maintenance Phases
Measure the clear ground space in all directions with a digital level to ensure it is less than 1:48 or 2.08%....
-
502 Parking Spaces
[See subsections ...]
-
502 Parking Spaces
[See subsections ...]
-
502 Parking Spaces
[See subsections ...]
-
F244.4 Pull-up Spaces for Recreational Vehicles at Dump Stations
Where provided, pull-up spaces for recreational vehicles at dump stations shall comply with 1012.2, 1012.4, and 1012.5....
-
Resting Intervals [1016.8]
A turning space that complies with section 304.3.2 of the ABA Standards must be provided....
-
Van Space: Wider Access Aisle
Van Space: Wider Access Aisle...
-
11B-203.5 Machinery spaces
Spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment shall not be required to comply with these requirements or to be on an accessible...
-
11B-203.5 Machinery spaces
Spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment shall not be required to comply with these requirements or to be on an accessible...
-
7(1)(b)
(b) Clearance between counters and all opposing base cabinets, countertops, appliances or walls is at least 40 inches.
-
4.34.5.2 WATER CLOSETS
[See subsections ...]
-
ADA Gap Tool
ADA Gap Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring gaps in ground or floor surfaces....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. Where a condition for...
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible. This includes localized variations in slope as well as bumpiness created by small, individual units such as bricks,...
-
Dimensional Tolerances in Construction and for Surface Accessibility
[See subsections ...]
-
Observations and Results
Although a thicker surface would have lasted longer, the clear implication is that equestrian traffic requires a much tougher surface to resist the forces applied....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....