The camp shelter floor at the entrance or opening must be no higher than 19 inches when measured from the clear ground space....
Search Results "Input Floor"
Filters
Commonly Searched Documents
-
Transfer Access [1014.2.1]
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
Limited-Use/Limited-Application Elevators, Destination-Oriented Elevators and Private Residence Elevators
They require passengers to enter their destination floor on an entry device, usually a keypad, in the elevator lobby....
-
Amenities
Accessible multi-station equipment is available on the open market. 1004 Exercise Machines and Equipment. 1004.1 Clear Floor Space....
-
ETA Public Telephone Summary Chart and Survey Instructions
here to view or download the Public Telephone Summary Chart (13.5 KB pdf) Click here to view or download the Public Telephone Survey Instructions (11.3 KB pdf) Notes: a. 1 per floor...
-
Knee and Toe Clearance (M303.2.4)
5 inches deep maximum at 14 inches above the floor Knee Clearance 11 inches deep minimum at 9 inches above the floor, and 8 inches deep minimum at...
-
2.2.3 Receivers
Many BTE hearing aids can accept a direct audio input (DAI) from an FM (or IR) receiver through a wire connector....
-
Benches
Ensure that the front edge of the bench seat is 17 to 19 inches (430 to 485 millimeters) above the ground or floor space....
-
1.5 Companion seat or companion seating
1.5 "Companion seat" or "companion seating" shall mean and refer to a seat within an auditorium, which is affixed to the auditorium floor, and which is immediately adjacent to a wheelchair...
-
M303.4.1 Breast Platform Adjustability
Breast platforms shall be continuously adjustable from a low height of 26 inches (660 mm) to a high height of 42 inches (1065 mm) above the floor....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
1. Public Pay Phone Bank
If one public pay phone or one bank of pay phones is provided on a given floor, does at least one pay phone have the following features:...
-
M12
If a mirror is provided, is the bottom of the reflecting surface no higher than 40 inches above the floor or is a full length mirror provided?...
-
707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
407.4.6.2 Buttons
Car control buttons with floor designations shall comply with 407.4.6.2 and shall be raised or flush. EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
412.3.5 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
1133A.5 Lower shelving
Lower shelving and/or drawer space shall be provided in the kitchen at a height of no more than 48 inches (1219 mm) above the floor....