808.2 Turning Space....
Search Results "Shower Clear Floor Space"
Filters
Commonly Searched Documents
-
808.2 Turning Space
-
703.2.8 Line Spacing
703.2.8 Line Spacing....
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open....
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar B-68137
36" W x 54" D (91 x 137cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick Two-Wall Tub/Shower Toilet Compartment Grab Bar B-5837
36" W x 54" D (91 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
805 Medical Care and Long-Term Care Facilities
Wheelchair turning space is required in patient rooms and resident sleeping rooms. The proposed rule prohibited this space from extending under beds (805.2)....
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided. ...
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided....
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
A4.10.12 CAR CONTROLS
In many cases, it will be possible to locate the highest control on elevator panels with 48 in (1220 mm) from the floor....
-
§ 38.53(d)(3) Exception
Retrofitted vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under...
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
A4.10.12 Car Controls
In many cases, it will be possible to locate the highest control on elevator panels within 48 in (1220 mm) from the floor....
-
610 Seats
[See subsections ...]
-
610 Seats
[See subsections ...]
-
610 Seats
610 Seats
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the...
-
Associated
Associated TAS 604.3.2 allows “associated” grab bars, dispensers, sanitary napkin disposal units, coat hooks, and shelves to overlap the required clearance around an accessible...
-
302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter except as allowed in 407.4.3, 409.4.3, 410.4, 810.5.3 and 810.10....
-
11B-206.2.4 Spaces and elements
[2010 ADAS] Advisory 206.2.4 Spaces and Elements. ...
-
11B-206.2.4 Spaces and elements
[2010 ADAS] Advisory 206.2.4 Spaces and Elements. ...
-
11B-206.2.4 Spaces and elements
Advisory 11B-206.2.4 Spaces and elements....
-
§ 38.53(d)(2) Exception
New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
