In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
Search Results "Floor Surface"
Filters
Commonly Searched Documents
-
11B-232.2.1.1 Beds
-
11B-232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
-
Plan 5A: 13-Foot Wide Accessible Guest Room
607.2); • Recessed transfer shower location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
M301.2.2 Sunset
The low transfer position height, Item A of M301.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register].
-
Plan 2B: 13-Foot Wide Accessible Guest Room
• Recessed alternate roll-in shower location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
-
Features of an Accessible Examination Room
A clear floor space, 30” X 48” minimum, adjacent to the exam table and adjoining accessible route make it possible to do a side transfer. 2....
-
11B-233.3.1.2.5 Multi-story residential dwelling units in buildings with no elevator
In non-elevator buildings, a minimum of 10 percent but not less than one of the ground floor multi-story residential dwelling units shall be calculated using the total number of multi-story...
-
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
M301.2.3 Size (Section-by-Section Analysis)
As discussed in Section IV.B.1.c (Significant Changes – Transfer Surface Size), in the final rule the Access Board has revised this provision to account for the two types of transfer surfaces...
-
7(2)(a)(ii)
(ii) Clear floor space is provided at fixtures as shown in Fig. 7 (a), (b), (c) and (d). Clear floor space at fixtures may overlap....
-
Magnuson Group RETTO Outdoor Waste Receptacle
Designed by Mattiussi Ecologia Spa, RETTO is a sturdy, front-loading receptacle with 26-gallon capacity that combines strong functional elements and rectilinear...
-
Pilot Rock CN-S7101A Kolorcans Round Trash Receptacle With Dome Lid
Model CN-S7101A is a round trash receptacle with dome lid and has a 42 gallon capacity. Made from rotationally molded polyethylene plastic which is a durable, heavy weight...
-
Pilot Rock Varmint Defiant Trash Can Cover
Model CN-VDT Varmint Defiant Trash Can Cover keeps all kinds of varmints, critters, small animals and other assorted pests out of your trash. The heavy weight hinged cover holds...
-
Pilot Rock CN-S7801A Kolorcans Square Trash Receptacle With Dome Lid
Model CN-S7801A is a square trash receptacle with dome lid and has a 32 gallon capacity. Made from rotationally molded polyethylene plastic which is a durable, heavy weight...
-
Magnuson Group BALLOON Outdoor Waste Receptacle
Designed by Mattiussi Ecologia Spa, BALLOON is a colorful, practical waste & recycling solution suitable for both indoor and outdoor environments. Manufactured from 100%...
-
Magnuson Group MECORA Outdoor Waste Receptacle
Designed by Mattiussi Ecologia Spa, MECORA is a strong, durable waste receptacle with 32-gallon capacity which is designed and manufactured to handle the rigor of outdoor...
-
Sec. 469.102. Procedure for Submitting Plans and Specifications
[See subsections ...]
-
11B-233.3.1.2.6.2 Test number one, individual building test
It is not required by this code to provide an accessible route when the terrain of the site is such that both of the following apply: 1. The slopes of the undisturbed site...
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment
The transfer or positioning support should be oriented horizontally on imaging equipment with transfer surfaces....
-
Figure 505.7.2 Handrail Non-Circular Cross Section – Drawing from the U.S. Access Board
-
M301.2.3 Size
The size of the transfer surface shall comply with M301.2.3.1 or M301.2.3.2. The size of transfer surfaces shall be measured from center points of their opposing sides....
