Elements that are not required by the standards to be provided for accessibility, such as phones, can be completely removed from a site....
Search Results "Built-In Element"
Filters
Commonly Searched Documents
-
Prohibited Reduction in Access
-
Key Differences Between Routes
Accessible Routes—An accessible route is a continuous, unobstructed path that connects all accessible elements and spaces of a building or facility....
-
Final Regulatory Flexibility Analysis
Advocacy expressed support for the Department's proposal to allow an element-by-element safe harbor for elements that now comply with the 1991 ADA Standards and encouraged the Department...
-
Slide Board Wheelchair Transfer
Requires the Registered User plan or above. Login! -
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-206.3 Location
Elements such as ramps, elevators, or other circulation devices, fare vending or other ticketing areas, and fare collection areas shall be placed to minimize the distance which wheelchair...
-
Intent
This Guide is intended as a resource for understanding accessibility requirements in California that are essentially architectural, including related communication elements....
-
Symmons SCOT® Slow-Closing Omni Temperature Lavatory Faucet S-60-H
If your next project requires a durable metering faucet that is built to withstand the rigors of high use commercial or institutional projects, think SCOT, the faucet that's built to last...
-
Accessibility Professionals Association (APA)
APA is an association of professionals focusing on accessibility in the built environment....
-
Surfaces (R302.7) (Section-by-Section Analysis)
R302.7) (Section-by-Section Analysis) The proposed technical requirements for surfaces apply to pedestrian access routes, including curb ramps and blended transitions, and accessible elements...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum," it would not be good practice to specify "5 pounds (...
-
PATH OF TRAVEL
Path of travel elements may be subject to upgrade as part of the alteration to an existing building if they do not conform to current accessibility requirements. ◼ [ADA Titles II &...
-
Alterations to Residential Facilities
Applying the general requirements for alterations to housing can result in partially accessible dwelling units where single elements or spaces in dwelling units are altered....
-
Aisle Stairs and Ramps in Assembly Areas
The 2010 Standards, at section 405.1, exempt aisle ramps adjacent to seating in assembly areas and not serving elements required to be on an accessible route, from complying with all of...
-
4.4.1 Overview of Mammography Accessibility Considerations
Ordinarily, the accessibility dimensions are static and are measured from a static element, such as the floor....
-
Effect on the certification process of using more than one regulatory scheme at the state or local level to establish accessibility requirements for title III facilities with new design requirements in the proposed standards. (Section-by-Section Analysis)
The proposed standards will include requirements for elements and spaces that are not addressed specifically in the 1991 Standards, including elements within recreational facilities and...
-
How this guide is organized
Reference samples and guidance provides advice on what to do and what not to do for different interface elements Section 2....
-
Future Work
Grab bars and handhelds placed in other locations (e.g. in the front, on the sides, overhead, or to the element itself) could have enabled more successful transfers. ...
-
Maintenance of Accessible Features
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Web Accessibility
Ensure that interactive elements are easy to identify. Provide clear and consistent navigation options....
-
11B-403.5.1 Clear width
The clear width for aisles shall be 36 inches (914 mm) minimum if serving elements on only one side, and 44 inches (1118 mm) minimum if serving elements on both sides. 5. ...
-
Protruding Objects and Outdoor Recreation Access Routes
Accessibility guidelines do not consider natural elements (such as tree branches and rock formations) to be protruding objects....
-
Vehicular Route Exceptions—Sections 206.2.1 and 206.2.2 of the 2010 Standards
also contain an exception for accessibility within a site which provides that an ‘‘accessible route shall not be required between accessible buildings, accessible facilities, accessible elements...
