Touch screen units shall be allowed to be vertically mounted with the centerline of the display screen no more than 52 inches above the floor in compliance with Section 11B-707.7.1.1....
Search Results "Vertical Clearance"
-
11B-805 Medical care and long-term care facilities
-
Resting Intervals [1016.8]
The vertical alignment of the ORAR, turning space, and resting interval must be nominally planar (i.e., as flat as possible) so that all the wheels of a mobility device touch the ground...
-
Dune Crossings [1018.10]
The technical requirements for dune crossings do not address the vertical pickets provided in some handrail designs....
-
1. Typical Issues for Individuals Who Use Wheelchairs, Scooters, or other Mobility Devices
Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
-
Transit Stops (R308.1) (Section-by-Section Analysis)
Boarding platforms at transit stops must be positioned to coordinate with vehicles to minimize the vertical and horizontal gaps....
-
1010.1.7 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
1118B.6
If the side reach is over an obstruction, the reach and clearances shall be as shown in Figure 11B-5D(c)....
-
Automatic Doors and Power Assisted Doors [4.13.12]
Some power-assists are activated by opening the door manually (and must meet ADAAG requirements for maneuvering clearance in 4.13.6 and opening force in 4.13.11) while others may be activated...
-
Designed Use
For example, pack and saddle stock require higher and wider clearances than do hikers, so a trail managed for both foot travel and horse use would have a designed use of "Pack and Saddle...
-
Kitchen Counters, Walls, and Floors
Staggered stud construction to prevent noise transmission to other rooms Zero clearance kitchen entries with less than 1/4” change of elevation throughout the accessible route. ...
-
3.3.10 90-Degree Turn
While all of the standards compared in this report have requirements for “wheelchair turning spaces”, only the U.S. and Canada have requirements specifically for 90-degree or L-Turn clearances...
-
Clear Floor Space: Minimum Clear Floor Space Required - Manual, Power & Scooter
The clear floor area width dimension also informs the minimum clearance width for successful passage through corridors, doorways, and wheelchair ramps....
-
§ 38.77(b)
Handrails shall be placed to provide a minimum 11/2 inches knuckle clearance from the nearest adjacent surface....
-
902 Dining Surfaces and Work Surfaces
Some commenters also recommended a higher minimum height of 29 inches instead of 28 inches to allow a more comfortable knee clearance. Response....
-
Harmar IL500 Sierra Incline Platform Lift
Choose it wherever a stairway lift doesn’t fit a user’s accessibility needs or a vertical platform lift isn’t appropriate for residential use. ...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Recycled Plastic
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Lumber
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
Single lever handle is simple to use and makes adjusting water temperature easy High-arc gooseneck spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning...
-
Fur out the wall
Just need to make sure all other clearances, (42" from center line to adjacent wall/fixture is clear, etc.) ...
-
1002.6 Transfer Devices for Use with Amusement Rides
Where a series of transfers are required to reach the amusement ride seat, each vertical transfer should not exceed 8 inches (205 mm)....
-
11B-1002.6 Transfer devices for use with amusement rides
Where a series of transfers are required to reach the amusement ride seat, each vertical transfer should not exceed 8 inches (205 mm). ...
-
Ramps
Ramps with a rise greater than six inches must have handrails and if there are vertical drop offs on the sides, there must be edge protection....
-
11B-206.3 Location
Additionally, accessible vertical interior circulation must be in the same area as stairs and escalators, not isolated in the back of the facility....
-
1002.6 Transfer Devices for Use with Amusement Rides
Where a series of transfers are required to reach the amusement ride seat, each vertical transfer should not exceed 8 inches (205 mm)....
