6”RDX42” Tall, Powder coated (PC) to match Clear Anodized Aluminum, ***See color chart for other color options*** Surface mount with concealed mounting base, 1 prep at 36”AFF for...
Search Results "Transition Plate"
Commonly Searched Documents
- Wikk Industries Inc. Bollard With Push Plate PART#BPR SM-PC CLEAR
- Wikk Industries Inc. Bollard With Push Plate Part #BPR8 SM AINS32D (630)
-
R207.1 General
A curb ramp, blended transition, or a combination of curb ramps and blended transitions complying with R304 shall connect the pedestrian access routes at each pedestrian street crossing....
-
T302.3 Openings
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter. Elongated openings shall be placed so that the long dimension is...
- Wikk Industries Inc. Bollard With Push Plate PART#BPR SM AINS 32D (630)
- Wikk Industries Inc. Bollard With Push Plate PART# BPS SM PRP36 CL (628)
- Wikk Industries Inc. Bollard With Push Plate PART# BPS SM TUBE 32D (630)
-
§8.24(d) Transition plan and time period for structural changes
(d) Transition plan and time period for structural changes....
-
1132A.4.1, Item 1
1. Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical.
-
Value Contrast (slide 9)
Fixed Surfaces To show where vertical and horizontal surfaces meet is very important. To show edges is very important. And one place where this is really important, even though...
-
10.3.1(15)
(15) Where clocks are provided for use by the general public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals, and/or digits shall...
-
Thresholds [§404.2.5]
Thresholds [§404.2.5] The height of thresholds is limited to 1/2” in new construction. The edge must be beveled 1:2 maximum above a height of 1/4”. A maximum height of 3/4” is...
-
§ 37.147 Considerations during FTA review
In reviewing each plan, at a minimum FTA will consider the following:
-
1132A.4.1, Item 1
1. Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical.
-
§ 37.149 Disapproved plans
[See subsections ...]
-
Section 37.143 Paratransit Plan Implementation
Section 37.143 Paratransit Plan Implementation As already discussed under §37.135, the states will receive FTA recipient plans for recipients of funding under 49 U.S.C. 5311...
-
§ 38.179(a)
(a) New and used trams consisting of a tractor unit, with or without passenger accommodations, and one or more passenger trailer units, including but not limited to vehicles...
-
a) Curb Ramps
Consistent with its Curb Ramp and Sidewalk Transition Plan, the City installs approximately 1,200 new curb ramps each year....
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
that had been recently installed on new transit buses....
-
§ 38.23(c)(3) Ramp threshold
The transition from roadway or sidewalk and the transition from vehicle floor to the ramp may be vertical without edge treatment up to 1/4 inch....
-
May a transit operator deny boarding to a rider whose wheelchair is difficult to secure?
If the transit operator has a policy that requires securement, or if a rider asks that the wheelchair be secured, Section 37.165(f) of the DOT ADA regulations requires transit personnel...
-
May a transit operator deny boarding to a rider whose wheelchair is difficult to secure?
If the transit operator has a policy that requires securement, or if a rider asks that the wheelchair be secured, Section 37.165(f) of the DOT ADA regulations requires transit personnel...
-
Department of Transportation, Federal Transit Administration
Department of Transportation, Federal Transit Administration offers information on the public transit provisions of the ADA....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....