If the transit operator has a policy that requires securement, or if a rider asks that the wheelchair be secured, Section 37.165(f) of the DOT ADA regulations requires transit personnel...
Search Results "Transition Plate"
2010 ADA Definition
Transition Plate: A sloping pedestrian walking surface located at the end(s) of a gangway.
-
May a transit operator deny boarding to a rider whose wheelchair is difficult to secure?
-
May a transit operator deny boarding to a rider whose wheelchair is difficult to secure?
If the transit operator has a policy that requires securement, or if a rider asks that the wheelchair be secured, Section 37.165(f) of the DOT ADA regulations requires transit personnel...
-
Department of Transportation, Federal Transit Administration
Department of Transportation, Federal Transit Administration offers information on the public transit provisions of the ADA....
-
R208.1 Where Required
Detectable warning surfaces complying with R305 shall be provided at the following locations on pedestrian access routes and at transit stops: 1....
-
11B-304.2 Floor or ground surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception:...
-
Floor or Ground Surfaces: ADA Standard Section 304.2
Section 304.2 covers the current ADA Standards for the ground surfaces of a turning space.
-
11B-304.2 Floor or ground surfaces
Floor or ground surfaces of a turning space shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception:...
-
10.3.1(12)(a)
(a) If an interior public pay telephone is provided in a transit facility (as defined by the Department of Transportation) at least one interior public text telephone shall be provided in...
-
A. TITLE II OF THE ADA
Public entities are directed to develop a "transition plan" to "achieve program accessibility" by "setting forth the steps necessary to complete such changes." 28 C.F.R. § 35.150(d)(1);...
-
R304.1 General
Curb ramps and blended transitions shall comply with R304. Advisory R304.1 General....
-
R304.5.1.1 Pedestrian Circulation Paths Other Than Shared Use Paths
In pedestrian circulation paths other than shared use paths, the clear width of curb ramp runs, blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....
-
II-8.1000 General
In addition, public entities with 50 or more employees are required to -- 1) Develop a grievance procedure; 2) Designate an individual to oversee title II compliance; 3) Develop a transition...
-
Figure 303.2 Vertical Change in Level – Drawing from the U.S. Access Board
-
§ 38.95(c)(5) Slope
Ramps or bridge plates shall have the least slope practicable....
-
11B-206.2.19 Pedestrian street crossings
Where walks or sidewalks are provided, a curb ramp, blended transition, or a combination of curb ramps and blended transitions complying with Section 11B-406 shall connect the walks or sidewalks...
-
T502.2.2 Other Vehicles
For other non-rail vehicles, the vertical clearance at doorways shall be 56 inches (1420 mm) minimum on small non-rail vehicles and 68 inches (1725 mm) on large non-rail vehicles.
-
Issue: Curb Ramps
One way to ensure the proper integration of curb ramps throughout a city is to set a series of milestones for curb ramp compliance in the city’s transition plan....
-
Requirements to Remember for: Remanufacture or Rebuilt Vehicles
[See subsections ...]
-
§35.150(d)(3)
(3) The plan shall, at a minimum --
-
Thresholds at Doorways [4.13.8]
Thresholds at Doorways [4.13.8] Thresholds complicate wheelchair maneuvering through doors, especially at doors equipped with closers. Negotiating level changes while...
-
§ 35.150(d)(3)
(3) The plan shall, at a minimum—
-
Section 37.153 FTA Waiver Determination
Section 37.153 FTA Waiver Determination If the FTA Administrator grants a waiver for undue financial burden, the waiver will be for a specified period of time and the...
-
11B-404.2.9 Door and gate opening force
At each location where push plates are provided there shall be two push plates; the centerline of one push plate shall be 7 inches (178 mm) minimum and 8 inches (203 mm) maximum above the...
-
11B-404.2.9 Door and gate opening force
At each location where push plates are provided there shall be two push plates; the centerline of one push plate shall be 7 inches (178 mm) minimum and 8 inches (203 mm) maximum above the...
