(4) If a public entity has already complied with the transition plan requirement of a Federal agency regulation implementing section 504 of the Rehabilitation Act of 1973, then the requirements...
Search Results "Transition Plate"
2010 ADA Definition
Transition Plate: A sloping pedestrian walking surface located at the end(s) of a gangway.
-
§ 35.150(d)(4)
-
U.S. Department of Transportation, Federal Transit Administration, Office of Civil Rights
The Federal Transit Administration (FTA) is an agency within the United States Department of Transportation (DOT) that provides financial and technical assistance to local public transit...
-
11B-406.5 Common requirements
Curb ramps and blended transitions shall comply with Section 11B-406.5....
-
11B-406.5 Common requirements
Curb ramps and blended transitions shall comply with Section 11B-406.5....
-
11B-406.5 Common requirements
Curb ramps and blended transitions shall comply with Section 11B-406.5....
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
R304.5 Common Requirements
Curb ramps and blended transitions shall comply with R304.5....
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-406.5.8 Counter slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level. [2010 ADA Standards] 406.2 Counter Slope....
-
R308.1.2 Boarding Platforms
Boarding platforms at transit stops shall comply with R308.1.2 and R308.1.3....
-
R304.4.1 Running Slope
The running slope of blended transitions shall be 5 percent maximum....
-
Common Requirements (R304.5) (Section-by-Section Analysis)
Common Requirements (R304.5) (Section-by-Section Analysis) The clear width of curb ramp runs (excluding flared sides), blended transitions, and turning spaces must be 1.2 meters (4 feet...
-
§ 35.150(d) Transition plan
(d) Transition plan....
-
General (R304.1) (Section-by-Section Analysis)
Blended transitions are raised pedestrian street crossings, depressed corners, or similar connections between the pedestrian access route at the level of the sidewalk and the level of the...
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
11B-406.5.8 Counter slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level. Figure 406.2 Counter Slope of Surfaces Adjacent to Curb Ramps...
-
§ 38.125(c)(6)(i) Requirement
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
-
406.2 Counter Slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level. Figure 406.2 Counter Slope of Surfaces Adjacent to Curb Ramps...
-
11B-406.5.8 Counter slope
The adjacent surfaces at transitions at curb ramps to walks, gutters, and streets shall be at the same level....
-
§ 38.83(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater then 1/4 inch, shall have a clear width of 30 inches, and shall...
-
§ 38.125(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear width of 30 inches and...
