The width of the usable trail tread and adjacent usable surface....
Search Results "Existing Trail"
Filters
Commonly Searched Documents
-
Clear Tread Width
-
1011.1 General
The requirements in 1011 apply to outdoor constructed features provided within camping facilities, picnic facilities, viewing areas, and trailheads or on trails....
-
7.4.3 Slope
Trail running slopes (grades) and cross slopes shall comply with sections 7.4.3.1 and 7.4.3.2....
-
Platform Lifts: ADA Standard Section 206.7
Section 206.7 covers scoping requirements in the most current ADA Standards for accessible routes to platform lifts.
-
11B-206.7 Platform lifts
Platform lifts shall be permitted as a component of an accessible route in an existing building or facility....
-
Tread
Tread—The portion of a trail, outdoor recreation access route, or beach access route where traffic moves (for pedestrian routes, this is the walking surface)....
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
1. Access Barrier Removal in Existing Pedestrian Facilities
Access Barrier Removal in Existing Pedestrian Facilities The Settlement Agreement requires the City to spend approximately $1.37 billion over the next thirty (30) years to implement...
-
Designed Use
The “Managed Use” of a trail that requires the most demanding design, construction, and maintenance parameters....
-
Existing ICT
ICT that has been procured, maintained or used on or before January 18, 2018.
-
F213.1 General
* * * * * EXCEPTION: Pit toilets provided on trails and in camping facilities shall not be required to comply with F213. Advisory F213.1 General....
-
7.2.2 General Exception 2
If after applying General Exception 1 it is determined that it is impracticable to provide a trail complying with 7.4, the trail shall not be required to comply with 7.4....
-
11B-228.3.1.1 Existing facilities
Where new EVCS are added to a facility with existing EVCS, the requirements of Section 11B-812 shall apply only to the new EVCS installed....
-
11B-228.3.1.1 Existing facilities
Where new EVCS are added to a facility with existing EVCS, the requirements of Section 11B-812 shall apply only to the new EVCS installed....
-
101.2 Effect on Removal of Barriers in Existing Facilities
This code applies to alterations to existing facilities that are subject to the barrier removal requirement under Title III of the ADA to the extent required by regulations issued by the...
-
7.2.2.2 Extent of Impracticability
Where General Exception 2 permits exemption of an entire trail from the requirements of section 7.4.1 through 7.4.8, it may be beneficial to construct a portion of the trail to meet the...
-
Overview of the Leveraged Freedom Chair in Developing Countries
Overview of the Leveraged Freedom Chair (LFC), a wheelchair designed specifically for use in developing countries, where existing products cannot cope with the rough terrain....
-
Running Slope [1017.7.1]
Running slope, also referred to as grade, is the lengthwise slope of a trail, parallel to the direction of travel....
-
7.4.3.1 Running Slope (Grade)
Trail running slope (grade) of up to 1:20 (5 percent) is permitted for any distance....
-
7.4.4.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with ABAAS section 304.3.2 shall be provided. ...
-
Teeing Grounds: ADA Standard Section 238.2.1
Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
-
11B-238.2.1 Teeing grounds
Exception: In existing golf courses, the forward teeing ground shall not be required to be one of the teeing grounds on a hole designed and constructed so that a golf car can enter and exit...
-
1017.4 Passing Spaces
Entities should consider providing either 60 inches minimum clear tread width on trails or passing spaces at shorter intervals where the trail is heavily used or where the trail is a boardwalk...
-
Stairs and Escalators in Existing Buildings: ADA Standard Section 206.2.3.1
Section 206.2.3.1 covers the scoping requirements for accessible routes between stairs and escalators in existing buildings.
