For measures taken to comply with the program accessibility requirements of this section, existing facilities shall comply with the applicable requirements for alterations in § 35.151 of...
Search Results "Existing Trail"
-
§ 35.150(b)(5) Exemption for small facilities
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
F202.2.5 Drinking Fountain
Where a drinking fountain is not provided in an addition but is provided in the existing building or facility to serve the addition, at least one drinking fountain in the existing building...
-
7.2.2.1 Determining Impracticability
The use of General Exception 2 is reasonable where one or more conditions for an exemption in section 7.1 and at least one of the following limiting factors exist: Limiting Factor 1. ...
-
1017.1 General
Trails shall comply with 1017. EXCEPTIONS: 1. ...
-
1017.1 General
Trails shall comply with 1017. EXCEPTIONS: 1....
-
Exception for accessible means of egress in existing buildings in IBC 2000
Exception: Accessible means of egress are not required in alterations to existing buildings....
- Trail Construction and Maintenance Notebook - 2007 Edition
-
11B-221.2.1.6 Specialty seating areas
Exception: In existing buildings and facilities, if it is not readily achievable for wheelchair spaces to be placed in each specialty seating area, those services or amenities shall be provided...
-
11B-221.2.1.6 Specialty seating areas
Exception: In existing buildings and facilities, if it is not readily achievable for wheelchair spaces to be placed in each specialty seating area, those services or amenities shall be provided...
-
Surface
Surface—The top layer of ground on a recreation site, outdoor recreation access route, trail, or beach access route Firm. A surface that resists deformation by indentations....
-
F202.2 Additions
Each addition to an existing building or facility shall comply with the requirements for new construction....
-
7.4.5 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 7.4.5 at intervals of 1000 feet (300 m) maximum. ...
-
1017.8.3 Slope
Resting intervals shall have slopes not steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than...
-
Outdoor Constructed Features
[See subsections ...]
-
7.4.12.2 Gate Hardware
Gate hardware shall comply with operable controls requirements in ABAAS section 309.4 and 404.2.7.
-
1017.8.3 Slope
This section requires the slope of resting intervals to not be steeper than 1:48 in any direction. Where the surface is other than asphalt, concrete, or boards, slopes not steeper...
-
1017.8.3 Slope
Resting intervals shall have slopes not steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than...
-
4.1.5 ACCESSIBLE BUILDINGS: ADDITIONS
Each addition to an existing building shall comply with 4.1.1 to 4.1.4 of 4.1, Minimum Requirements, except as follows:...
- Meet the GRIT Freedom Chair Trailblazers!
- How to: wrap your levers
- Tips for riding the Freedom Chair
- Freedom Chair vs Regular wheelchair