Raised characters shall comply with 703.2 and shall be duplicated in braille complying with 703.3. Raised characters shall be installed in accordance with 703.4....
Search Results "Character Width (VMS)"
-
703.2 Raised Characters
-
703.2 Raised Characters
Raised characters shall comply with 703.2 and shall be duplicated in braille complying with 703.3. Raised characters shall be installed in accordance with 703.4....
-
Emergency Communication: ADA Standard Section 407.4.9
Section 407.4.9: covers the current ADA Standards for the elevator emergency communication systems.
-
Width [4.3.3.] and Passing Space [4.3.4]
A continuous minimum clear width of 36 inches is required for accessible routes, but a reduction to 32 inches is allowed for a linear distance of no more than 24 inches (e.g., a doorway)...
-
403.5.2 Clear Width at Turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1220 mm) wide, clear width shall be 42 inches (1065 mm) minimum approaching the turn, 48...
-
Width: ADA Standard Section 405.7.2
Section 405.7.2 covers the current ADA Standards for the required width of ramp landings.
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high....
-
11B-407.2.3.1 Floor designation
Floor designations shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high....
-
11B-403.5.2 Clear width at turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1219 mm) wide, clear width shall be 42 inches (1067 mm) minimum approaching the turn,...
-
11B-216.14 Variable message signs
ETA Editor's Note Variable message signs (VMS) were not addressed by the original 2013 CBC. ...
-
§ 38.55(b)
(b) Characters on signs required by paragraph (a) of this section shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10, with a minimum...
-
Raised and Braille Characters on Hoistway Entrances [4.10.5]
Raised characters must be 2 inches high. Braille characters are often located below raised characters, although the location is not specified in ADAAG....
-
B. Door Clear Width
Does at least one lobby entrance door allow at least 32" clear passage width so persons who use wheelchairs, walkers, crutches, and other mobility aids can get through the door?...
-
1016.3 Clear Width
This section requires the clear width of outdoor recreation access routes to be 36 inches minimum....
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
The bold dashed line in the table and figure indicates the current ADA-ABA requirement of a 91.5 cm (36 in.) passage width....
-
1016.3 Clear Width
The clear width of outdoor recreation access routes shall be 36 inches (915 mm) minimum....
-
1016.3 Clear Width
The clear width of outdoor recreation access routes shall be 36 inches (915 mm) minimum....
-
Floor Designation: ADA Standard Section 407.2.3.1
Section 407.2.3.1 covers the current ADA Standards for elevator floor designations.
-
7.4.4.2 Width
Where resting intervals are provided adjacent to the trail tread, the resting interval clear width shall be 36 inches (915 mm) minimum....
-
R302.3 Continuous Width
R302.3 Continuous Width The SNPRM would revise R302.3 to read as follows: R302.3 Continuous Width....
-
1008.2.4 Clear Width
1008.2.4 Clear Width. Accessible routes connecting play components shall provide a clear width complying with 1008.2.4....
-
707.7.2 Characters
707.7.2 Characters. Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I"....
-
11B-403.5.2 Clear width at turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1219 mm) wide, clear width shall be 42 inches (1067 mm) minimum approaching the turn, 48...
-
11B-403.5.2 Clear width at turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1219 mm) wide, clear width shall be 42 inches (1067 mm) minimum approaching the turn, 48...