deemed to comply with the requirements of this section with respect to those facilities, except that the elevator exemption contained at section 4.1.3(5) and section 4.1.6(1)(j) of the 1991...
Search Results "1991 Standards"
2010 ADA Definition
1991 Standards: From 2010 Title II Regulations section 35.104 & 2010 Title III Regulations section 36.104: Requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this part.
Filters
Commonly Searched Documents
-
§ 35.151(c)(1)
-
Definitions
The 2010 Standards define some terms that are also defined in HUD’s Section 504 regulation. In such cases, the definition in HUD’s Section 504 regulation shall control....
-
Trail Managed Use
(See the Federal Trail Data Standards.)...
-
Trail Designed Use
(See the Federal Trail Data Standards.)...
-
Model Building Codes and Industry Standards
The Access Board’s 2004 ADA Accessibility Guidelines, upon which the current ADA Standards are based, have been harmonized to a significant extent with industry standards and model building...
-
National Accessibility Code
There is no statutory authority to establish one nationally uniform set of accessibility standards....
-
Can access be provided after construction based on need?
Access required by the ADA Standards must be put in place and ready for use as part of construction....
-
1. Adoption of the 2010 ADA Standards for Accessible Design
Adoption of the 2010 ADA Standards for Accessible Design....
-
II-6.2000 Choice of design standard: UFAS or ADAAG.
[See subsections ...]
-
Most Fascinating Guy on the Planet
As amazing as he is, the most fascinating guy on the planet doesn't know what he needs to know about accessibility. Even he needs Corada to help him stay compliant.
-
You're Never Too Young ... to Learn About the ADA
Children playing with their toys notice that only one of their door thresholds is compliant. They remind us that we are never too young to learn about the ADA.
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
§ 37.9(c)(1)
(1) New construction or alterations of buildings or facilities on which construction has begun, or all approvals for final design have been received, before November 29, 2006, are...
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
FAQ: How do I access the 2010 ADA Standards?
To access the 2010 ADA Standards: 1. From the home page, click on the "2010 ADA Standards" button in the top navigation or click here....
-
G. ANSI/AAMI HE 75
The Access Board has considered the recommended practices in Chapter 16 of ANSI/AAMI HE 75 in developing the technical criteria for the proposed standards....
-
If a state or local authority interprets an accessibility requirement differently than how a comparable requirement in the ADA Standards is interpreted under the ADA (or waives that requirement completely), does this have any bearing on ADA compliance?
may interpret or waive their own state or local accessibility codes as they see fit, those decisions have no effect on the obligation to comply with requirements of the applicable ADA Standards...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....