A water closet may project a maximum of 12 inches (305 mm) into the opening, provided that a minimum of 36 inches (914 mm) clear space is maintained between the water closet and the shower...
Search Results "Expected Maximum Flight Duration"
Filters
Commonly Searched Documents
-
1134A.6, Item 1.2
-
11B-505.5 Clearance
Handrails may be located in a recess if the recess is 3 inches (76 mm) maximum deep and 18 inches (457 mm) minimum clear above the top of the handrail. [2010 ADAS] 505.5 Clearance. ...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum. The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
§ 38.93(a)(2)
is connected by an aisle with a minimum clear width of 30 inches to one or more spaces where wheelchair or mobility aid users can be accommodated, then such doorway shall have, to the maximum...
-
11B-812.5.4 Arrangement
Vehicle spaces installed in existing facilities shall comply with Section 11B-812.5.4 to the maximum extent feasible....
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum....
-
11B-505.5 Clearance
Handrails may be located in a recess if the recess is 3 inches (76 mm) maximum deep and 18 inches (457 mm) minimum clear above the top of the handrail....
-
DORMA ED700 Low-Energy Swing Door Operator
The ED700 may be used for door widths up to 48" (1220 mm) and a maximum weight of 200 lb (91 kg)....
-
Use of Accompanying Adults or Children as Interpreters
Use of Accompanying Adults or Children as Interpreters Historically, many covered entities have expected a person who uses sign language to bring a family member or friend to interpret...
-
Communication Barriers
Ask questions about follow-up treatment plans, if any, and the expected benefits or side-effects of medications....
-
Future Work
barrier free or more level transfer for certain types of transfer elements (e.g. playground equipment, amusement park rides, medical diagnostic equipment) or places where transfers are expected...
-
EVACUATION + TRANSPORTATION MANAGEMENT
TRIGGER: Severe impacts expected from approaching weather. WHAT DOES THE CITY DO?...
-
A. Final Regulatory Assessment (EO 12866)
Expected benefits are discussed and likely incremental....
-
Introduction and Instructions
These tools should assist providers in complying with Centers for Medicare and Medicaid Services (CMS) expectations for services for Medicaid and Medicare populations with disabilities....
-
3.5 Other Tips for Increasing Access
Talk to the instructors before the class to let them know you will be there, so you will both know what to expect....
-
RESULTS OF OBJECTIVE SURFACE MEASUREMENT
Wheelchair Work Values for Straight Propulsion Note: The “I” shaped vertical lines indicate the standard error of the mean, a statistic that estimates the variability expected if repeated...
-
Design Speed
At the other extreme, hand cyclists appear to have the lowest 15th percentile speed, 8 km/h (5 mi/h), of those users who would be expected to operate in the street....
-
Standards
deviation of 3mm in 3m, Class B has a maximum deviation of 6mm in 3m, and a Class C has a maximum deviation of 6 mm in 600 mm....
-
Bus Stop Pads
The proposed rule specified that these dimensions were required to "the maximum extent allowed by legal or site constraints" (1002.2.2)....
-
Shower Spray Unit
Comments also noted that delivered water should be "temperature limited" to the specified maximum (120 degrees) for consistency with American Society of Safety Engineers (ASSE) standards...
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
