The final rules permits exceptions to the specific provisions in the technical requirements for certain elements and facilities based on the conditions listed in Table 2 under Executive...
Search Results "Clearance in Base"
-
Steps to Minimize Significant Economic Impacts on Small Entities
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Testing - Phase I & II
The first set of questions was fact-based and related to their tactile experience and recall of the interpretive information they had been provided at the beginning of the experiment....
-
Must elevator doors remain open for 20 seconds?
The opening time is further determined by the travel distance from hall call buttons and signal timing based on a 1.5 ft/s travel speed beginning from audible and visible signalization of...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
1193.23(b)(4) (Advisory Guidance)
It is important to obtain input from persons or organizations with established expertise to ensure that input is not based merely on individual preferences or limited experience. 2....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
11B-813 Adult changing facilities
ETA Editor's Note Adult changing facilities are not addressed by 2010 ADA Standards, although a case could be made, based on the general obligation for governments to make their services...
-
Work Areas [4.1.1(3)]
Recommendations: Space for turning within the work area and interior maneuvering clearances at doors, while not required, should be considered, especially where entrapment may be a concern...
- Wikk Industries Inc. Bollard With Push Plate PART#BPRT126SMFT32D (630)
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
Non-Rail Vehicle Guidelines as public transportation providers operating 100 or more buses in annual maximum service in fixed route bus modes, through either direct operation or contract, based...
-
Standards Development
Buildings will be certified based on the incorporation of universal design features. Designers will be accredited through an educational program....
- Strike First Corporation The Centurionâ„¢ Portable Fire Extinguisher Cabinet
- Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Recycled Plastic
- Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Lumber
- Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
-
Background
This approach is also based on section 204 of the ADA, which provides that the regulations issued by the Attorney General to implement title II shall be consistent with the ADA and with...
-
Section 36.208 Direct Threat (Preamble, Section-by-Section Analysis)
must be based on an individual assessment that conforms to the requirements of paragraph (c) of this section....
-
a) "Neighborhood" Access Theory
He admitted, however, that his opinion was not based on any authoritative publication in his field, but was simply his personal opinion. RT 407:8-22....
- Mockett CH12-SSS Dual Prong Coat Hook
-
F223.1.1 Alterations
In alterations and additions, the minimum required number is based on the total number of sleeping rooms altered or added instead of on the total number of sleeping rooms provided in a facility...
-
F224.1.1 Alterations
In alterations and additions, the minimum required number of accessible guest rooms is based on the total number of guest rooms altered or added instead of the total number of guest rooms...