in this section, applies to the occasional case where the nature of an existing facility makes it virtually impossible to comply fully with applicable accessibility standards through a planned...
Search Results "Compliance Planning"
Filters
Commonly Searched Documents
-
[ADA Title III §36.402(c)] To the maximum extent feasible
-
Implementation Approach and Schedule
The Interactive Travel Services Association (ITSA) opposed the phased implementation timeline and urged the Department to impose a single compliance deadline of at least 18 months after...
-
Section 35.150(b)(2) Safe harbor (Section-by-Section Analysis)
Once the compliance date is reached, such noncompliant facilities or elements must be made accessible in accordance with the 2010 Standards....
-
Safe Harbor is applied element by element in existing facilities
Do all of the existing elements of that type in the facility have to be considered for modification to bring those elements into compliance with all of the additional requirements in the...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
11B-403.5.2 Clear width at turn
Exception: Where the clear width at the turn is 60 inches (1524 mm) minimum compliance with Section 11B-403.5.2 shall not be required. FIGURE 11B-403.5.2 CLEAR WIDTH AT TURN...
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations and barrier removal....
-
Fixtures
For purposes of compliance with TAS 604.3.2, the reference to “fixture” shall mean the plumbing fixtures identified in TAS 213.3 and baby changing tables which are identified as convenience...
-
Gaps
However, if compliance with those measurements is not operationally or structurally feasible, operators may use bridge plates, ramps or other devices....
-
C.7.ii. - Can a federal agency provide alternate web pages for users with disabilities to supplement web pages that have innovative features which are inaccessible to assistive technologies?
be creative and innovative in the use of new technologies, Section 1194.22(k) requires that a text-only web page be provided only as a method of last resort for bringing a web site into compliance...
-
2010 ADA Standards for Accessible Design
Full compliance with the 2010 Standards is required only for new construction and alterations. The web address for the 2010 Standards is in the Resources section....
-
Executive Order 13132 (Federalism)
the relationship between the national government and the States, or the distribution of power and responsibilities among the various level of government; (2) imposes substantial direct compliance...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
12185(d) Deadline
If the President determines that compliance with the regulations issued pursuant to section 12186(a)(2)(B) of this title on or before the applicable deadlines specified in section 12186(...
-
§ 36.304(d)(3)
(3) If, as a result of compliance with the alterations requirements specified in paragraph (d)(1) and (d)(2) of this section, the measures required to remove a barrier would not be readily...
-
4.1 Path of Travel Upgrades Not Required
4.1 Path of Travel Upgrades Not Required: 11B-202.4 Exception 2 does not require path of travel upgrades for certain elements that have been previously constructed or altered in compliance...
-
68.20(e) Railroad Vehicles
(e) Commercial facilities are subject to the Act and compliance with TAS if they are intended for non-residential use by a private entity and if their operations will affect commerce....
-
4. Access to Newly Constructed and Altered Facilities
Access to Newly Constructed and Altered Facilities In implementing the program, the City will ensure that all future construction and alteration work on Pedestrian Facilities will be in compliance...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
1.9.1.8 Adopting agency identification
ETA Editor's Note The remainder of California Building Code Chapter 1 is not adopted by Division of the State Architect - Access Compliance (DSA-AC), has been omitted....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
2012 Florida Accessibility Code for Building Construction Pocket Guide
with the Code provides presumption of compliance with the ADA Standards....
-
1. General Exception
Through testimony at the public hearings, comments, and MDE Advisory Committee discussions, the manufacturers of imaging equipment consistently raised concerns about inherent barriers to compliance...