This section requires tent platforms to be 19 inches high maximum measured from the clear ground space to the tent platform surface....
Search Results "Unit of Measurement"
-
1013.4 Height
-
Technical Requirements
The specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.). ...
-
1014.2.1.2 Floor Height
The camp shelter floor at the entrance shall be 19 inches (485 mm) high maximum measured from the clear ground space....
-
§8.27(a)(1)
(1) First, to a current occupant of another unit of the same project, or comparable projects under common control, having handicaps requiring the accessibility features of the vacant unit...
-
§100.201 Covered multifamily dwellings
Covered multifamily dwellings means buildings consisting of 4 or more dwelling units if such buildings have one or more elevators; and ground floor dwelling units in other buildings consisting...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
Trusted SEO Services in Jaipur for Better Search Engine Rankings
Whether you are a local business, service provider, or growing enterprise, our focus remains on delivering measurable improvements through ethical SEO methods that support long-term online...
-
Congresswoman Tammy Duckworth Can't Get Gas
Requires the Registered User plan or above. Login! -
Press Release
Press Release The parties to this Settlement Agreement are the United States of America and the City of DeKalb, Illinois....
-
1.6.17 Sterile Area.
A portion of an airport, specified in the airport security program, in which certain security measures specified in 49 CFR part 1542, Airport Security, are carried out....
-
2. Referenced Documents
2.1 ASTM standards E867 Standard Terminology Relating to Vehicle-Pavement Systems E1364 Standard Test Method for Measuring Road Roughness by Static Level Method E1926 Standard...
-
Acknowledgments
Acknowledgments The development of objective surface measurement devices and objective surface testing was conducted with funding from the National Center for Medical Rehabilitation Research...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
§8.27(b)
(b) When offering an accessible unit to an applicant not having handicaps requiring the accessibility features of the unit, the owner or manager may require the applicant to agree (and may...
-
1128A.1 General
Covered multifamily dwelling units shall be adaptable and accessible into and throughout the dwelling unit as provided in this division....
-
M301.2.3 Size
The size of transfer surfaces shall be measured from center points of their opposing sides....
-
1013.4 Height
Tent platforms shall be 19 inches (485 mm) high maximum measured from the clear ground space to the tent platform surface....
-
702.9.1 TIA-1083-B
Telecommunications—Communications Products—Handset Magnetic Measurement Procedures and Performance Requirements, October 2015, IBR approved for Appendix C, Section 412.3.2....
-
§ 35.151(b)(2)
(2) The path of travel requirements of § 35.151(b)(4) shall not apply to measures taken solely to comply with the program accessibility requirements of this section....
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
Side Approach
Side Approach The maximum reach depth for a high (54 inch maximum) reach is 10 inches, measured from the clear floor space....
-
1013.4 Height
Tent platforms shall be 19 inches (485 mm) high maximum measured from the clear ground space to the tent platform surface....
-
1.2.4
1.2.4 When local horizontal discontinuities and vertical alignments are measured according to Section 1.1.9 a recommended tolerance is ±1/8 in. (3 mm)....