Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
Search Results "Maximum Dimension"
Filters
Commonly Searched Documents
-
11B-809.10.6.5 Thresholds
-
11B-809.10.6.4 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum...
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
COMMERCIAL PLACE OF PUBLIC AMUSEMENT
[DSA-AC] An auditorium, convention center, cultural complex, exhibition hall, permanent amusement park, sports arena, theater or movie house for which the maximum occupancy is 2,500 or more...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
11B-812.5.4 Arrangement
Vehicle spaces installed in existing facilities shall comply with Section 11B-812.5.4 to the maximum extent feasible....
-
AquaTrek2 ADA Ladder System
ADA REQUIREMENTS: No Open Risers 8” Maximum Riser Height 8” Tread Depth **We provide 12”** 24” Maximum Width Between Handrails Top Landing Handrail...
-
Lilypad Wheelchair Scale
The Lilypad Scale has a maximum capacity of 400 lbs with 0.5 lbs of accuracy....
-
Fur out the wall
The centerline of the water closet shall be 16 inches (405 mm) minimum to 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430...
-
Cavity Sliders USA Inc. CL100 ADA Privacy Lever Lock for Pocket Doors
IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum and 48 inches (1220 mm) maximum above the finished floor to meet ADA guidelines....
-
Delta Single Handle Basin Faucet 570LF-WFHDF
set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Single hole installation Standard spout swivels 360¿ Assembled dimensions...
-
Omnia Industries Inc. Interior Modern Lever Latchset with Square Rose - Stainless Steel No.25S
Interior Modern Lever Latchset with Square Rose - Stainless Steel Dimensions: 2-5/8" Projection x 5-3/8" Length, 5/8" Lever Diameter Rose: 2-3/8" Square x 7/16" Projection Finishes...
-
Don-Jo Mfg., Inc. Pull Plate 7011
Product Specifications Number 7011 Dimensions 3-1/2" x 15" Ansi J405 Ctc 5-1/2" Diameter 5/8"...
-
American Standard Cadet Bidet 5023.111
For deck-mounted single control fitting • Vitreous china • Integral overflow • Two bolt caps included Shown with 2000.011 Ceramix Bidet Fitting (not included) Nominal Dimensions...
-
Mega Jailhouse Heavy Duty Liquid Soap Dispenser
The dimension of the dispenser is 7-1/8" H by 4-1/2" W by 3-5/8" D and the spout extends 5-1/16"....
-
Mind's Eye Audio Tours
Art Centers Incorporate sound as another dimension of interpretation of visual art works....
-
FOREWORD
The guidelines provided in the American Association of State Highway and Transportation Officials (AASHTO) Guide to the Development of Bicycle Facilities are based on the physical dimensions...
-
Definition of "wheelchair." (Section-by-Section Analysis)
Some transit system commenters wanted size, weight, and dimensions to be part of the definition because of concerns about costs associated with having to accommodate devices that exceed...
-
Adjustable Height Range Considered
The technical criteria allow the height of transfer surfaces to be either fixed or adjustable within the 17 inches minimum and 19 inches maximum range....
-
Newly Constructed Tabled Intersections That Contain Pedestrian Street Crossings With Yield or Stop Control (Section-by-Section Analysis)
Newly Constructed Tabled Intersections That Contain Pedestrian Street Crossings With Yield or Stop Control (Section-by-Section Analysis) The 2 percent maximum cross slope requirement...
-
Addendum F: Relative Height Differences
Adjustable Height No Grab Bars/No Backrest Maximum Height (n=71) .300 3.5 5.00 9.00 13.7...
-
11B-809.8 Doors
., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 4 inches (102 mm)....
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
