A commenter cited research conducted in Japan which indicated that a surface very similar to that specified by section 705 ranked high in detectability....
Search Results "High-Contrast Captioning"
-
Truncated Domes
-
F101 Purpose
Federal agencies must design distinctive and high quality Federal facilities that meet all of the following standards: (b) Provide individuals with disabilities ready access to, and use...
-
Accessible Boat Slips
Edge protection is not required, but if provided, it can be 4 inches high maximum and 2 inches deep maximum at the continuous clear openings....
-
Undue Burden
The decision that a particular aid or service would result in an undue burden or fundamental alteration must be made by a high level official, no lower than a Department head, and must be...
-
Why Design for Accessibility?
The US Department of Justice enforces the ADA through negotiated public settlements and high-profile lawsuits based on complaints....
-
Aircraft Accessibility
priority storage space within the cabin to stow at least one passenger’s folding wheelchair [Sec. 382.21(a)(2)] and DOT has interpreted that to mean a space at least 13 inches wide, 36 inches high...
-
Accessible Slopes
Put one end at the high point of the surface and raise the other end so that the bubble is in the middle of the level’s gauge. The level is now level....
-
Capabilities, Resources, and Facilities
experience in producing high-quality technical reports. The resources needed are relatively minimal....
-
III-7.8400 Business and mercantile
No, but employees should be instructed to bring food items around to the front of high counters for individuals with disabilities....
-
Alternative Designs
The 24" high sides make it impossible to install the two grab bars on the back wall in the manner prescribed in ADAAG....
-
11B-1003.3.1 Boat slip clearance
Edge protection shall be permitted at the continuous clear openings, provided that it is 4 inches (102 mm) high maximum and 2 inches (51 mm) wide maximum. 3....
-
Section 37.161 Maintenance of Accessible Features--General
However, repairing accessible features must be made a high priority....
-
11B-1003.3.1 Boat slip clearance
Edge protection shall be permitted at the continuous clear openings, provided that it is 4 inches (102 mm) high maximum and 2 inches (51 mm) wide maximum....
-
1003.3.1 Boat Slip Clearance
Edge protection shall be permitted at the continuous clear openings, provided that it is 4 inches (100 mm) high maximum and 2 inches (51 mm) wide maximum. 3....
-
The Advance Notice of Proposed Rulemaking
The public asked about captioning and the division of responsibility between the Department and the Access Board for fixed and non-fixed (or free-standing) equipment. ...
-
Organization of This Rule
Because the Department indicated in the NPRM that it did not intend to regulate certain areas, including equipment and furniture, accessible golf cars, and movie captioning and video description...
-
Tips for Weighing People Using an Accessible Scale
It is well documented that weight gain and obesity can be linked to: Cardiovascular Disease; High Blood Pressure; Unhealthy Cholesterol Levels and Lipid Levels;...
-
8.2.2 Stimuli
A high quality microphone attached to a sound level meter picked up the signals and delivered them to a digital audio tape recorder....
-
2.6 Conspicuity Ratings
Distributions with many responses in the 4 or 5 categories indicate high conspicuity ratings and distributions, while many responses in categories X, 1, and 2 indicate low conspicuity ratings...
-
Poured in Place Rubber
Drop heights from composite equipment up to 8 ft. high passed the field test. ...
-
M307 Operable Parts
For an unobstructed forward reach or side reach, the reach ranges are 48 inches maximum for a high reach and 15 inches minimum for a low reach....
-
1. Technical Standard for Web Site Accessibility
Regarding compliance with the WCAG 2.0 standard at Level AA, the carrier associations asserted that requiring carriers to comply with WCAG 2.0 would “set a very high bar that exceeds federal...
-
Legislation
current ADAAG guidelines (Table 1) provide a description of the suggested width and slope, but do not provide guidance on pathway roughness except that obstacles should be no more than 1/2" high...
-
Bobrick Single Robe Hook B-7671
Hook is 1 5⁄8" high, 13⁄16" wide (40 x 20mm). Projects 1 5⁄8" (40mm) from wall....
