Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
Search Results "Clearance in Base"
Filters
Commonly Searched Documents
-
11B-217.4 TTYs
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
11B-813 Adult changing facilities
ETA Editor's Note Adult changing facilities are not addressed by 2010 ADA Standards, although a case could be made, based on the general obligation for governments to make their services...
-
Mockett CH12-SSS Dual Prong Coat Hook
DESCRIPTION Dual pronged Satin Stainless Steel coat hook sits on twin bases for a distinguished executive design and a clean simple line....
-
Background
This approach is also based on section 204 of the ADA, which provides that the regulations issued by the Attorney General to implement title II shall be consistent with the ADA and with...
-
Section 36.208 Direct Threat (Preamble, Section-by-Section Analysis)
must be based on an individual assessment that conforms to the requirements of paragraph (c) of this section....
-
a) "Neighborhood" Access Theory
He admitted, however, that his opinion was not based on any authoritative publication in his field, but was simply his personal opinion. RT 407:8-22....
-
1118B.6
If the side reach is over an obstruction, the reach and clearances shall be as shown in Figure 11B-5D(c)....
-
Automatic Doors and Power Assisted Doors [4.13.12]
Some power-assists are activated by opening the door manually (and must meet ADAAG requirements for maneuvering clearance in 4.13.6 and opening force in 4.13.11) while others may be activated...
-
Designed Use
For example, pack and saddle stock require higher and wider clearances than do hikers, so a trail managed for both foot travel and horse use would have a designed use of "Pack and Saddle...
-
Kitchen Counters, Walls, and Floors
Staggered stud construction to prevent noise transmission to other rooms Zero clearance kitchen entries with less than 1/4” change of elevation throughout the accessible route. ...
-
3.3.10 90-Degree Turn
While all of the standards compared in this report have requirements for “wheelchair turning spaces”, only the U.S. and Canada have requirements specifically for 90-degree or L-Turn clearances...
-
§ 38.77(b)
Handrails shall be placed to provide a minimum 11/2 inches knuckle clearance from the nearest adjacent surface....
-
902 Dining Surfaces and Work Surfaces
Some commenters also recommended a higher minimum height of 29 inches instead of 28 inches to allow a more comfortable knee clearance. Response....
-
Wikk Industries Inc. Bollard With Push Plate Part #BPR8 SM AINS32D (630)
Surface mount with concealed mounting base. Flat Recessed area for ADA switch and Card Reader. Welded angle top to the back....
-
Magnuson Group VOICI Magazine Racks
Choose from standard glides or caster base meodels. Shelves are adjustable to three positions, horizontal, 30 degrees or 45 degrees....
-
Magnuson Group FLIP Brochure & Leaflet Holders
Silver base and post with glass green acrylic....
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Recycled Plastic
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Lumber
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
Single lever handle is simple to use and makes adjusting water temperature easy High-arc gooseneck spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning...
-
DOT Response
The Department continues to believe that standards based on Access Board guidelines for transportation vehicles are the appropriate basis for requirements pertaining to the design and construction...
-
Wikk Industries Inc. PART#BPS SM-INGR CLEAR (628) with I36-3 CLEAR (628)
6”X6”X42” Tall, Clear Anodized Aluminum (628), Surface mount with concealed mounting base, 1 prep for INGRESS’R® ADA switch, Removable Black ABS cap Shown on the bollard- I36-3 Clear...
-
224.1.1 Alterations
In alterations and additions, the minimum required number of accessible guest rooms is based on the total number of guest rooms altered or added instead of the total number of guest rooms...
