ADA Standards for Accessible Design | Temporary Barrier Removal Suggestions for Accessible Features It is important to note that people who are blind or have low vision may use all routes...
Search Results "Removable Base Cabinet"
-
Feature 4 - Routes to the Meeting Space
-
Technical Memorandum TM 2013-20 Valet Parking
All of these exemptions were removed from the 2012 TAS (and 2010 ADA); therefore, in addition to the passenger loading zone requirements of TAS 209.4 and 503, valet parking facilities must...
-
Water Closet Clear Floor Space
Language prohibiting fixtures and obstructions within the required clearances in section 604.3.1 has been removed....
-
Grab Bar Cross Sections
Edges must be rounded, and the requirement that edges have a c [sic] inch minimum radius (609.2 in the proposed rule) has been removed....
-
1018.1 General
Removable beach access routes shall not be required to comply with 1018.7, 1018.8, and 1018.10. Advisory 1018.1 General Exception 2. ...
-
2010 STANDARDS FOR ACCESSIBLE DESIGN
above will be replaced by the 2010 Standards, which become mandatory and enforceable, and must be applied to all new construction, renovations, modifications, alterations, and barrier removal...
-
THREATS AND HAZARDS: WHAT CAN YOUR COMMUNITY DO?
CLEAN UP: help clean up the neighborhood and remove debris. (Remember to inform people about taking proper precautions.)...
-
Title III - Private Entities
Additionally, public accommodations must remove barriers in existing buildings where it is easy to do so without much difficulty or expense....
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
For example, if the platform height relative to the top of rail is raised, if the old surface is removed and/or a new surface put down, or if there is a reconstruction of or structural change...
-
1018.1 General
Removable beach access routes shall not be required to comply with 1018.7, 1018.8, and 1018.10. Advisory 1018.1 General Exception 2....
-
INTRODUCTION
These characteristics have been defined as: Stability – the degree to which a surface resists change from contaminants or applied force, so that when the contaminant or force is removed...
-
II. MODEL FACILITIES
In addition to being the starting point for architectural-barrier and inaccessible-medical-equipment surveys, barrier removal, and accessible-medical-equipment installation, the model facilities...
-
11B-213.3.4 Lavatories
Since the CBC path of travel obligation to remove existing barriers only allows "safe harbor" dating back to the "immediately preceding edition" (see 11B-202.4, Exception 2), existing facilities...
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
Non-Rail Vehicle Guidelines as public transportation providers operating 100 or more buses in annual maximum service in fixed route bus modes, through either direct operation or contract, based...
-
Standards Development
Buildings will be certified based on the incorporation of universal design features. Designers will be accredited through an educational program....
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Introduction
Subcommittee members felt that the definitions should be based on how the device is defined by manufacturer as follows: Manufacturers design examination tables with primary functions...
-
§27.127(e)(2)
All decisions are based on the hearing record and written findings shall be made....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
Signage
Recommendations: Signs should include appropriate messages based on the type of system provided, such as "Infrared Assistive Listening System Available -- Please Ask," "Audio Loop in Use...
-
Protruding Objects [4.4]
Requirements in 4.4 are based on standard cane techniques used by people with vision impairments. There are two principal techniques: the touch technique and the diagonal technique....
-
Steps to Minimize Significant Economic Impacts on Small Entities
The final rules permits exceptions to the specific provisions in the technical requirements for certain elements and facilities based on the conditions listed in Table 2 under Executive...
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Testing - Phase I & II
The first set of questions was fact-based and related to their tactile experience and recall of the interpretive information they had been provided at the beginning of the experiment....