Exception: The centerline of accessible water closets located in ambulatory accessible compartments shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall...
Search Results "Compartment Width"
Commonly Searched Documents
-
1115B.4.1, Item 1
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
that is opposite the transfer side (see M301.2.3 and M302.2.3) similar to the provisions in the 2004 ADA and ABA Accessibility Guidelines for grab bars provided at bathtubs and shower compartments...
-
Comparison of Single-User Toilet Room Layouts: 1A, 1B, and 1C
The size of this space is determined by the minimum width required for the water closet and lavatory between the side walls, the minimum wheelchair turning space, and the space required...
-
Ramps
They must meet the ADA's requirements regarding slope, width, landings, handrails, and edge protection....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
diagnostic equipment used by patients in the seated position required transfer surfaces to have the option to transfer from a mobility device onto one short side (depth) and one long side (width...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Accessible Routes on the Playing Surface
The orientation of the length and the width have not been specified for added flexibility in design. Slopes on landings must be no more than 1:20 (5%)....
-
Alternative Golf Car Passage
A golf car passage can be substituted for all or part of the accessible route connecting elements within the boundary of the course and must be a minimum of 48 inches in width....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
A 34-inch minimum width between the supports will allow for adequate elbow space for a user of a wheeled mobility device to push the wheels onto the platform and does not infringe on the...
-
Distinct Viewing Locations [F246.2, 1015.2, and 1015.3]
The viewing space must be free and clear of obstructions between 32 and 51 inches above the ground and must extend the full width of the clear ground space....
-
C) Accessible Entrance
The clear width of the opening must be at least 32 inches wide and accessible door hardware (handle and latch) must be provided....
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
The Purpose of FSORAG and FSTAG
trail is included (scoping); what has to comply with the guidelines; definitions of terms; and technical requirements defining the physical characteristics of accessible features, such as width...
-
Non-Tactile Signage
TACTILE NON-TACTILE Character Proportion Font/ Style raised characters: · sans or "simple" serif · upper case only · width-to-height ratios for character...
-
3.3.13 360-Degree Turn
* indicates data plotted in the graph Figure 3-13. 360-degree turning width area: research findings versus the standards....
-
1.1.17 Stairs
For stairs 60 in. (1520 mm) or less in width, measure along a line approximately 18 in. (460 mm) from the wall or outside edge of the stair....
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
- Tork Image Design™ Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Recessed