Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
Search Results "Compartment Width"
Filters
Commonly Searched Documents
-
404.2.10 Door and Gate Surfaces
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Recumbent Bicycles
Recumbents are generally longer and wider than upright bicycles, but they are available in many different shapes and sizes so length and operating width vary greatly....
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3....
-
11B-406.6 Islands
The clear width of the accessible route at islands shall be 60 inches (1524 mm) wide minimum. Where curb ramps are provided, they shall comply with Section 11B-406....
-
American Standard Times Square Deck- Mount Bathtub Faucet with Personal Shower
Specs Dimensions Height - 11-1/4" Width - 6-1/2" - 12"...
-
Salsbury Industries Custom Designer Lockers 30000C
Ranging from one to seven (7) tiers, custom designer lockers can be ordered in any combination of five (5) heights (36", 48", 60", 72" and 84"), five (5) widths (12", 15", 18", 21" and 24...
-
AJW Architectural Products UJ14 Series UJ14A Hook Strip 26"L, 3 Hooks - Surface Mounted
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Units with greater widths require additional hooks Custom lengths available Product Specs Hook...
-
Tork Elevation® Liquid Soap Dispenser, Black
Product Data System - S1 - liquid soap system Material - Plastic Height - 11.5 in Width - 4.4 in Depth - 4.5 in Color - Black...
-
SuperDeck Beach Boardwalk
Features + Benefits: Easy installation requiring no special tools Long-lasting polyethylene SuperDeck pays for itself in maintenance savings Three deck and float widths...
-
Tork Xpress® Multifold Hand Towel Dispenser, Stainless Steel
Product Date System - H2 - Xpress interfold hand towel system Material - Metal/Plastic Height - 18 in Width - 12 in Depth - 4 in Color -...
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
Mill finish aluminum Integral vapor barrier option available Key Specifications: Floor/Floor, Floor/Wall Conditions Movement: +/- 25% Joint width...
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
assembly Standard loading capabilities Aluminum mill finish Key Specifications Floor/Floor, Floor/Wall Conditions Movement: +/- 25% Joint width...
-
SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
Standard widths are 60" wide and are available from 2" to 6" in height....
-
Hussey Seating Company Roll-A-Way Seating
Available in 2-chair (approx. 46”/1168 mm) or 3-chair (approx. 66”/1676mm) widths to accommodate one or two wheelchairs. Adjacent companion chairs can be permanently installed....
-
Midmark 630 HUMANFORM™ Procedures Table
Height: Minimum 18" (45.7 cm), Maximum 40" (101.6 cm) Seat Tilt Angle Range: 0 ̊ to 30 ̊ Back Support Angle Range: 0 ̊ to 80 ̊ Foot Support Angle Range:0 ̊ to 90 ̊ 28" Upholstery Width...
-
Detectable Warning Surfaces at Shared Use Path Intersections
The detectable warning surface would extend 2 feet minimum in the direction of pedestrian travel and the full width of the intersecting segments. We request comments on this issue....
-
Dune Crossings [1018.10]
When a dune crossing is part of a beach access route, the clear width of the beach access route may be reduced from a minimum of 60 inches to a minimum of 48 inches....
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
1017.1 General
The technical requirements address the surface of the trails, passing spaces, and resting intervals (1017.2); the clear tread width of trails (1017.3); passing spaces (1017.4); tread obstacles...
-
2.3.4 Analysis of Door Use Difficulty
The mean, median and range of WhMD user age, occupied width, occupied length and maximum power grip were also reported as we thought that these variables might help explain the door use...
-
Comparison: 2010 and 1991 ADA Standards for Accessible Design - Scoping Requirements
., Door opening shall provide clear width of 32 inches minimum, Thresholds shall be ½ inch high maximum....
-
Program Accessibility
Structural changes may include combining two toilet compartments to create an accessible toilet compartment, lowering a section of a service counter, installing a ramp at a building entrance...
