Further, this commenter noted that the requirement conflicts with proposed M302.2.3, which allows for temporary obstructions such as armrests, footrests, and side rails that can be repositioned...
Search Results "Commuter Rail Car"
Filters
Commonly Searched Documents
-
M305.2.8 Fittings (Section-by-Section Analysis)
-
Accessible Entrance
If a drop-off exists, then a barrier such as a raised edge or railing must be installed....
-
Problem Three
Problem Three: Accessible parking spaces or access aisles are on a sloped surface and do not provide a level area for a safe transition from the voter’s car to a wheelchair....
-
4.10.14* EMERGENCY COMMUNICATIONS
The highest operable part of a two-way communication system shall be a maximum of 48 in (1220 mm) from the floor of the car....
-
Error/Omission: The built-up curb ramp projects into the access aisle.
Result: When an access aisle has a sloped surface, a wheelchair may roll away from a car or van preventing the wheelchair user from getting out of the vehicle....
-
§ 38.51(c)
(c) Existing vehicles which are retrofitted to comply with the “one-car-per-train rule” of §37.93 of this title shall comply with §§38.55, 38.57(b), 38.59 of this part and shall have, in...
-
Section 37.23 Service Under Contract
If a public entity wishes to acquire vehicles for use on a commuter route, for example, it must acquire accessible vehicles....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
Examples of "same decor" include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where...
-
703.4.1 Height above Finish Floor or Ground
EXCEPTION: Tactile characters for elevator car controls shall not be required to comply with 703.4.1. ...
-
Paperwork Reduction Act
They would also have to make a comparison between using car-borne lifts and other means of meeting the regulatory performance standard (see section 37.42(d)(1))....
-
What distinguishes passenger loading zones from bus loading zones?
For example, at an airport, passenger drop-off and pick-up areas serving cars, taxis, limousines, vans, and other vehicles are treated as passenger loading zones, while stops exclusively...
-
Parking
Requirements Parking provided at the polling place must meet specific minimum width requirements for spaces and access aisles so voters with mobility disabilities can get out of their car...
-
GameTime Music Time Playground Equipment
A plastic striker is attached to a rail above and below the instrument and when children pull the striker across the surface, it creates a fun ratchet-like sound. ...
-
Sizewise Bari Rehab Platform
Features such as the open side rail design, the low working height of the deck and the simplified hand control all reduce stress of the patient as well as the caregiver....
-
Besam Hurricane Resistant Automatic Sliding Door
strength for aesthetics Besam Resilience sliding door combines powerful performance with attractive appearance ... including many standard door package aesthetics, such as narrow stile rails...
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
A 1:6 maximum for non-rail vehicle ramp slopes, in their view, was safer and more in line with current technology....
-
217 Telephones
on public telephones (217.3) clarifying the application of TTY scoping requirements to exterior sites (217.4.4) incorporating requirements for transportation facilities, including rail...
-
8. Transportation Vehicles
The guidelines, which the Board originally published in 1991, apply to new or remanufactured vehicles (they also include provisions for rail vehicles that the Board will update separately...
-
R302.3 Continuous Width
The continuous clear width requirements in R302.3 apply to sidewalks and other pedestrian circulation paths, pedestrian street crossings and at-grade rail crossings, and pedestrian overpasses...
-
8. Transportation Vehicles
The guidelines, which the Board originally published in 1991, apply to new or remanufactured vehicles (they also include provisions for rail vehicles that the Board will update separately...
-
Handrails [4.8.5]
This clearance allows space for knuckles while preventing entrapment for people who lean on rails with their forearm....
-
Handrails Along Walking Surfaces [§403.6, §505]
The bottom gripping surface can be obstructed up to 20% of the length (or along the full entire length when part of crash rails or bumper guards)....
-
§ 38.23(b)(13) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
Fares
The system operates the same regardless of whether the paratransit trip is being provided in place of a bus or a rail trip the user cannot make on the fixed route system....
