Handset cords, if provided, shall be 29 inches (735 mm) long minimum....
Search Results "Shall"
-
Handsets: ADA Standard Section 708.3
-
Doors, Doorways, and Gates: ADA Standard Section 206.5
Section 206.5 covers scoping requirements in the most current ADA Standards for accessible routes to doors, doorways, and gates.
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-202.1 General
Additions and alterations to existing buildings or facilities shall comply with Section 11B-202....
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
-
11B-213.3.5 Mirrors
Where mirrors are provided, at least one shall comply with Section 11B-603.3....
-
11B-706.6 Peak clipping level
Peak clipping shall not exceed 18 dB of clipping relative to the peaks of speech....
-
11B-811.2 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-411.2.3 Signs on jambs of elevator hoistway entrances
Signs on jambs of elevator hoistway entrances shall comply with Section 11B-411.2.3....
-
11B-245.1 General
Public accommodations located in private residences shall comply with Section 11B-245....
-
11B-411.2.1 Hall call consoles
Hall call consoles shall comply with Sections 11B-411.2.1 and 11B-309....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-703.5.1 Finish and contrast
Characters and their background shall have a non-glare finish....
-
Station Names: ADA Standard Section 810.6.3
Stations covered by this section shall have identification signs complying with 703.5....
-
Landings: ADA Standard Section 405.7
Section 405.7 covers the current ADA Standards for ramp landings.
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
101.2 Scope
The provisions of this code shall apply to the construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition...