American with Disabilities Act there is a general obligation to provide accessible EVCS; however, specific requirements for EVCS have not been adopted in the ADA Standards for Accessible Design...
Search Results "Franchise Design"
Filters
Commonly Searched Documents
-
At what types of property/sites must the ADA requirements be met?
-
T603.2 Orientation
EXCEPTION: On large non-rail vehicles designed for use by both seated and standing passengers, rear-facing wheelchair securement systems shall be permitted provided that at least one wheelchair...
-
What is a “wheelchair”?
Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed...
-
§ 35.151(b)(3)
(3) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in § 35.151(c...
-
What is a “wheelchair”?
Americans with Disabilities Act of 1990 (ADA) (49 CFR Parts 27, 37, and 38) defines a “wheelchair” as a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed...
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
Wheelchair
Wheelchair means a manually-operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor or of both indoor and outdoor...
-
Why is a top landing required at curb ramps if side flares are provided?
They are not designed to accommodate wheelchair maneuvering except in alterations where space constraints preclude a compliant top landing....
-
§ 37.5(i)(4)
(4) In choosing among alternatives for meeting nondiscrimination and accessibility requirements with respect to new, altered, or existing facilities, or designated or specified transportation...
-
Wheelchair
Wheelchair means a manually-operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor or of both indoor and outdoor...
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment. ◼...
-
M301.3.1 Transfer Supports
It will be located at the designated transfer location....
-
3. Discussion of Comments on Related Fair Housing Issues Compliance Deadline
Section 100.205 of the Fair Housing regulations incorporates the Act's design and construction requirements, including the requirement that multifamily dwellings for first occupancy after...
-
Definition of "wheelchair.'' (Section-by-Section Analysis)
The NPRM defined a wheelchair as ‘‘a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian...
-
5.1 Architectural Barriers Act (ABA).
following ABA requirements apply to recipients of federal financial assistance from DOT: 5.1.1 ATBCB Final Rule, 36 CFR part 1190, Minimum Guidelines and Requirements for Accessible Design...
-
1.4 Overview of Report
However, as is clear throughout the report, with some important exceptions, current equipment designs rarely accommodate fully persons with disabilities....
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
size to be too restrictive, the vast majority of advocacy, nonprofit, and individual commenters opposed using the Department of Transportation's definition of ‘‘common wheelchair'' to designate...
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
M301.2.2 Transfer Surface Size
inches wide minimum and 21 inches deep minimum and is located such that the long dimension of 28 inches is be located parallel to the patient scanning/imaging table side at a location designated...
-
4.3.1 Overview of Imaging Equipment and Regulatory Environment
Generally, this equipment is permanently mounted in a fixed installation within specially designed spaces that must perform specific essential functions, including supporting heavy weight...