mounted on posts or pylons shall overhang circulation paths 12 inches (305 mm) maximum when located 27 inches (685 mm) minimum and 80 inches (2030 mm) maximum above the finish floor or ground...
Search Results "Practice Teeing Ground"
-
307.3 Post-Mounted Objects
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
-
5.8.2.8 Knee and Toe Clearance Recommendations Summary
For such a measurement, the top of the breast platform will be moved to 34 inches above the ground, and then the clearance dimensions will be measured just as they would be on any stationary...
-
11B-904.4.2 Forward approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a forward approach to the counter. [2010 ADA Standards] 904.4.2 Forward Approach....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
2. a. iii. Clear (Path-of-Travel) Floor Space
Access also includes how people will move into and around lobby and office reception areas, and determine the unobstructed floor or ground space to accommodate a wheelchair user....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3. ...
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
Accessibility Management Platform (AMP) for Mobile Accessibility Tool by SSB BART Group
Each platform has a complete library of automated and manual accessibility Best Practices updated and maintained by SSB on a continuous basis....
-
SciFit Inclusive Fitness PRO1 - Upper Body Machine
It is also ideal for ground-based training....
-
Gerber Manual Flush Valve 44-762
1/2" to 5" from center of angle screw stop to center of the main housing Copper casting and chrome plated housing ADA compliant metal oscillating handle 1" IPS angle screw stop Ground...
-
12203(a) Retaliation
.-- No person shall discriminate against any individual because such individual has opposed any act or practice made unlawful by this Act or because such individual made a charge, testified...
-
§27.11(c)(2)(iii)
(iii) Begin to modify, with official approval of recipient's management, any policies or practices that do not meet the requirements of this part according to a schedule or sequence that...
-
12203(a) Retaliation
(a) Retaliation No person shall discriminate against any individual because such individual has opposed any act or practice made unlawful by this chapter or because such individual made...
-
§35.150(d)(4)
plan requirement of a Federal agency regulation implementing section 504 of the Rehabilitation Act of 1973, then the requirements of this paragraph shall apply only to those policies and practices...
-
§100.500(a) Discriminatory effect
A practice has a discriminatory effect where it actually or predictably results in a disparate impact on a group of persons or creates, increases, reinforces, or perpetuates segregated housing...
-
§100.500(c)(2)
Once the charging party or plaintiff satisfies the burden of proof set forth in paragraph (c)(1) of this section, the respondent or defendant has the burden of proving that the challenged practice...
-
Food and Beverage Service
The Food Service: Accommodating Diners with Disabilities factsheet provides both legal standards and promising practices for paths of travel, approach to dining spaces, seating, dining...
-
APPENDIX D
PROPOSED ASTM INTERNATIONAL STANDARD Computing Pathway Roughness Index from Longitudinal Profile Measurements1 1This standard practice is under the jurisdiction of ASTM Committee...
-
§ 35.130(b)(7)(i)
(i) A public entity shall make reasonable modifications in policies, practices, or procedures when the modifications are necessary to avoid discrimination on the basis of disability, unless...
-
§ 35.136(i)(1) Reasonable modifications
A public entity shall make reasonable modifications in policies, practices, or procedures to permit the use of a miniature horse by an individual with a disability if the miniature horse...
