A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and/or...
Search Results "Designed Theaters"
Filters
Commonly Searched Documents
-
PLATFORM (WHEELCHAIR) LIFT
-
§ 37.17(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
§ 35.171(a)(1)(ii)
(ii) If the agency does not have section 504 jurisdiction, it shall promptly determine whether it is the designated agency under subpart G of this part responsible for complaints filed against...
-
§ 37.17(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
§ 35.151(j)(1)
(1) Residential dwelling units designed and constructed or altered by public entities that will be offered for sale to individuals shall comply with the requirements for residential facilities...
-
§ 37.131(a)(2)(ii)
(ii) At end stations and other stations in outlying areas, the entity may designate circles with radii of up to 11/2 miles as part of its service area, based on local circumstances....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
§ 37.3 Wheelchair
Wheelchair means a mobility aid belonging to any class of three- or more-wheeled devices, usable indoors, designed or modified for and used by individuals with mobility impairments, whether...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
PLATFORM (WHEELCHAIR) LIFT
A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and/or...
-
4.3.4 Knee and Toe Clearances
Moreover, the standards do not address this design issue in practical terms....
-
Introduction
This nationwide stratified random sample of men and women measured 14 anthropometric dimensions that can be used for the design of workspaces....
-
II. Statutory and Regulatory Background
As amended, Section 804(f)(3)(C) of the Act provides that unlawful discrimination includes a failure to design and construct covered multifamily dwellings for first occupancy after March...
-
Table 3
What are the additional costs due to the requirement compared to the total design and construction costs for the element or facility?...
-
A4.6.3 Parking Spaces
“Universal” Parking Space Design....
-
Summary
Summary This guide is intended to help designers and operators in using the accessibility guidelines for play areas....
-
Appoint an ADA Coordinator
If a public entity has 50 or more employees, it is required to designate at least one responsible employee to coordinate ADA compliance. ...
-
Anthropometry of Wheeled Mobility Project - Final Report
Access Board December 31st, 2010 Center for Inclusive Design and Environmental Access (IDeA) School of Architecture and Planning University at Buffalo The State University...
-
1. Start with Comprehensive Planning and Site Selection
Most public playgrounds are designed to be in place for 10-20 years....
-
11B-1008.4.2 Clear floor or ground space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
Classroom Acoustics
The standard, completed in 2002, has been approved as ASA/ANSI S12.60‒2002, Acoustical Performance Criteria, Design Requirements and Guidelines for Schools....