1991 Standards means the requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to 28 CFR part 36....
Search Results "Designed Theaters"
Filters
Commonly Searched Documents
-
1991 Standards
-
§ 38.107(a)
(a) If a restroom is provided for the general public, it shall be designed so as to allow a person using a wheelchair or mobility aid to enter and use such restroom as specified in paragraphs...
-
1134A.8, Item 3
Cabinets under lavatories are acceptable provided the bathroom has space to allow a parallel approach by a person in a wheelchair and the lavatory cabinets are designed with adaptable knee...
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
F233 Residential Facilities
Regarding GSA facilities (those covered in this pocket guide), guidance has been provided by GSA in its SubChapter C—Real Property Regulations at Part 102-76—Design and Construction....
-
Parking Lots
On paved parking lots, designating the required accessible spaces is relatively easy when repainting the parking lot stripes, especially right after the lot has been seal-coated....
-
3. EXCLUSIONS
The following facilities need not comply with these DoD Standards: Facilities, or portions of facilities, on a military installation 4 that are designed and constructed for use...
-
Historic Preservation [4.1.7]
"Qualified historic facilities" are facilities listed in the National Register of Historic Places or facilities designated as historic under state or local law....
-
F216.13 Trailhead Signs
Where new trail information signs are provided at trailheads on newly constructed or altered trails designed for use by hikers or pedestrians, the signs shall comply with 1017.11....
-
9.2* POST OFFICE LOBBIES
Avoid designs that call for, or may necessitate, non-fixed partitions in circulation routes of handicapped people....
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Freedom Trax Video 2
It is designed to be the convenient and portable solution to off-road mobility....
-
Garaventa Artira - Inclined Platform Wheelchair Lift for Curving Stairwyays
Garaventa Lift's Artira is an inclined platform wheelchair lift designed for straight or curving stairs with or without intermediate landings....
-
Delta Palm Hand Shower Head - Model 53001-DS
The universal design of the Palm shower provides simple, one-handed operation that puts you in control of your shower....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
§27.13(b)(1)
(1) The process for filing a complaint, including the name, address, telephone number, and email address of the employee designated under paragraph (a) of this section, must be sufficiently...
