As with pushbutton locator tones, the 2003 MUTCD requires that the volume of the audible WALK indication be carefully adjusted to be heard a minimum of 1.8 m (6 feet) and a maximum of 3.7...
Search Results "Height Adjustable"
-
Audible WALK indications
-
C. Equipment and technology questions
the captions equally good throughout the movie theater or are there certain seats in the theater that provide an enhanced level of readability or line of sight both to the screen and the adjustable...
- Panda UTS.60 Thermally Broken ULTRA Folding Door System
-
Study Limitations
However, the study participants on average did not appear to adjust their angle of approach too much in between protocols with and without the grab bars present on the station (Table 14)...
-
382.57 What services must carriers provide if their automated kiosks are inaccessible?
., to wheelchair users because of height or reach issues, to visually-impaired passengers because of issues related to visual displays or touch screens), carriers must ensure equal treatment...
-
Vertical Access to Mezzanines
Since mezzanines are elevated at heights similar to a full story, access by ramp or certain platform lifts may not provide a practical alternative....
-
2. Are play components that have multiple stations or which can include more than one person using them at one time considered one or two play components?
If required to be accessible, a play component must be on an accessible route, have clear floor or ground space and maneuvering space, and have entry points and seats at the required heights...
-
407.2.1.3 Clear Floor or Ground Space
The height of the clear floor or ground space is considered to be a volume from the floor to 80 inches (2030 mm) above the floor....
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
The limitation on edge protection height will reduce the possibility that the edge protection will interfere with the patient’s footrest. 5.8.1.2.2 Single Ramp Scale with Edge Protection...
-
407.2.1.3 Clear Floor or Ground Space
The height of the clear floor or ground space is considered to be a volume from the floor to 80 inches (2030 mm) above the floor....
-
Signs
Signs that provide direction to, or information about, functional spaces (§ 4.1.3(16)(b)) must comply with requirements for: Character proportion (§ 4.30.2); Character height...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
§ 37.42(f)
means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves and the vertical height...
-
Shelves, Sales and Service Counters, and Check-Out Aisles
However, shelves may be of any height since they are not subject to the ADA's reach range requirements....
-
Plumbing/Restrooms
11B-609 Ambulatory compartments 11B-604.8.2 Urinals 11B-605 Accessible lavatories, heights...
-
Signage
Signs are subject to requirements in 4.30 for character proportion (4.30.2) and height (4.30.3) and sign finish and contrast (4.30.5)....
-
9.2.2(7) Kitchens, Kitchenettes, or Wet Bars
Counter tops and sinks shall be mounted at a maximum height of 34 in (865 mm) above the floor....
-
Plumbing/Restrooms
11B-609 Ambulatory compartments 11B-604.8.2 Urinals 11B-605 Accessible lavatories, heights...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
§ 37.42(f)
means a boarding platform design in which the horizontal gap between a car at rest and the platform is no more than 10 inches on tangent track and 13 inches on curves and the vertical height...
-
(1)(a)
Fold-down or retractable seats or shelves may overlap the clear floor space at a lower height provided they can be easily folded up or moved out of the way....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
- Stanley Hardware RP9402 Door Closer