Accessible reach ranges specify a minimum height of 15 inches (308.3) for unobstructed reaches....
Search Results "Closer Height"
-
Reach Range
-
606 Lavatories and Sinks
These specifications concern clear floor space requirements (606.2, Exception 3) and heights (606.3, Exception 2)....
-
Physical Barriers
For example, is there an adjustable height examining table? Equipment or aids....
-
Passenger Loading Zones [4.6.6]
Where aisles are flush with the pull-up space, wheelchair transfer is easier (the change in level of aisles at curb height can make transfer very difficult)....
-
4.34.6.7* OVENS
Ovens shall be of the self-cleaning type or be located adjacent to an adjustable height counter with knee space below (see Fig. 52)....
-
1.1.12 Ramp cross slope
A simple method of establishing the relative elevations of the top and bottom of each ramp is to use a rotating laser level on a tripod and document the difference in height on a stiff metal...
-
[A] ALTERATION
resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
11B-607.6 Shower spray unit and water
If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars....
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
11B-233.3.1.2.6.5 Additional requirements.
Water closet seat height complying with Section 11B-809.10.7.4. 7. Electrical receptacles, switches and controls complying with Section 11B-809.12. 8....
-
608.3 Grab Bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor. EXCEPTIONS: 1....
-
608.3 Grab Bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor. EXCEPTIONS: 1....
-
703.3.1 Dimensions and Capitalization
0.090 (2.3 mm) to 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells¹ 0.241 (6.1mm) to 0.300 (7.6mm) Dot height...
-
Entrances
Additionally, the door hardware must not require tight grasping, pinching, or twisting, and the height of the door threshold must not be greater than ½ inch....
-
212 and 606 Kitchens, Kitchenettes, Lavatories, and Sinks
The technical requirements address clear floor space, height, faucets, and exposed pipes and surfaces....
-
Accessible Slopes
That means for every inch of height change there should be at least 12 inches of ramp run....
-
Lift Compatibility (M301.4 and M302.4)
A patient lift may be the only means of providing access to certain equipment that cannot meet the technical criteria for transfer surface height (see M301.2.1 and M302.2.1) because of the...
-
Tips for Assisting People Who Have Mobility Disabilities
When having a long conversation with a person who is using a wheelchair, stoop down or sit nearby so that you are closer to eye level....
-
Work Areas [4.1.1(3)]
., entry doors with closers); interior door clearances are recommended where space for full entry and turning is available within a work area....
-
HEWI Push/Pull Handle set to EN 179
Push/pull handles are not only suitable as emergency exit devices, they also enable accessible ease of use at a variable gripping height....
-
11B-1002.5 Amusement ride seats designed for transfer
The proximity of the clear floor or ground space next to an element and the height of the element one is transferring to are both critical for a safe and independent transfer....
-
Policies and Procedures
If security is a problem, an accessible call box or buzzer (identified by a sign and mounted in an accessible location and height) should be installed to enable people with disabilities...
-
Forward Approach
An existing exception for units designed specifically for children’s use permits a parallel approach if certain criteria for spout height and location are met....
-
Handrails Requirement
The handrail requirements in section 505 address specifications for continuity, height, clearance, gripping surface, cross section, fittings, and extensions....
