making lines of text difficult to track) Use dot leaders for tables of contents Use a strong, simple font, and avoid fine or "fancy" fonts Use normal spacing between characters...
Search Results "Character Width (VMS)"
Commonly Searched Documents
-
Producing Printed Material in Large Print
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted stating “Entry restricted and controlled by security personnel”. 2....
- Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
- Sesame Retractable Stairs with Lift
- Sargent AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device for Aluminum Doors
- Sargent 8300 Mortise Lock Exit Device
- Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
-
1133B.2.3.2
When an automatic door operator is utilized to operate a pair of doors, at least one of the doors shall provide a clear, unobstructed opening width of 32 inches (813 mm) with the door positioned...
-
Trailhead Signs
altered trails, include at minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width...
-
Automatic Door Break Out Openings
The minimum clear opening width for automatic doors is measured with all leaves in the open position....
-
Section 4.9.4
• Section 4.9.4 of the 1991 Standards requires handrails at the bottom of stairs to continue to slope for a distance of the width of one tread beyond the bottom riser nosing and to further...
-
Accessible Routes
Technical provisions address the width, slope, and surface of both ground level and elevated accessible routes....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
Rationale for the recommendation A transfer support will extend horizontally along the side of the patient scanning/imaging table at least the minimum width of the transfer surface, but...
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
The clear width of ramp runs would be required to be 36 inches minimum....
-
5) Areas of rescue assistance or places of refuge
Specific requirements are provided for such features as location, size, stairway width, and two-way communications....
-
11B-504.8 Floor identification
The outside diameter of the star shall be the same as the height of the raised characters....
- Pilot Rock Bench B110C with Full-length Grab Bar
- GE® 24" Standard Clean Free-Standing Gas Range JGAS02SENSS
- Kawneer North America 350/500 Tuffline™ Entrances
- TownSteel ED6500 Narrow Stile Panic Rim Device
- GPK UPPERTONE Unassisted Muscle Strengthening System for Quadriplegics
-
Where must the wheelchair symbol be posted?
See the ADA/ABA Accessibility Guidelines section 703 Signs for specifics on colors, symbols, and characters, including raised and Brailled letters and numbers. ...
- Whitehall Mfg. WH2105BAR Bariatric Toilet Siphon Jet Type Off-Floor