Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
Search Results "Character Width (VMS)"
Filters
Commonly Searched Documents
-
1016.5 Obstacles
-
1007.6.1 Size
Such wheelchair spaces shall not reduce the required means of egress width....
-
Revolving Doors or Turnstiles
automated revolving doors, if large enough, may be usable by people with disabilities, certain questions remain about the appropriate maximum speed, minimum diameter, compartment size, width...
-
Ambulatory Accessible Compartment
The width of ambulatory compartments is specified to ensure that the grab bars required on both sides are simultaneously within reach....
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
Ramp
The ramp had a constant width of 30 inches and was 1 inch thick. The minimum length was 8 inches and the maximum length was 11 inches....
-
11B-405.7.5 Doorways
Doors, when fully open, shall not reduce the required ramp landing width by more than 3 inches (76 mm)....
-
Accessibility Evaluation Surveys
For example, check doorways to see whether they have at least 32 inches (815 millimeters) of clear width (figure 14)....
-
Platform Edges
Where this breakaway material is installed at a platform edge, the width of the detectable warning surface can begin at the edge of the breakaway material rather than at the edge of the...
-
36 Inch Wide Stalls
A 36-inch width (absolute) allows the parallel grab bars to be used simultaneously when changing from a standing position to a seated position and vice versa....
-
Typical Issues
An accessible entrance must provide at least one accessible door with maneuvering space, accessible door hardware, and enough clear width to allow people who use crutches, a cane, walker...
-
Trailhead Signs
designed for use by hikers or pedestrians, the final rule requires the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width...
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
-
11B-704.2.1.2 Forward approach
If an additional 6 inches (152 mm) in width of clear floor space is provided, creating a clear floor space of 36 inches by 48 inches (914 mm by 1219 mm), the enclosure may extend more than...
-
11B-405.7.5 Doorways
Doors, when fully open, shall not reduce the required ramp landing width by more than 3 inches (76 mm)....
-
§ 38.23(d)(4) Orientation
wheelchair or mobility aid facing forward, or rearward with a padded barrier, extending from a height of 38 inches from the vehicle floor to a height of 56 inches from the vehicle floor with a width...
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
-
Mockett CH13K Quadruple Organic Coat Hooks
Size: 4 3/8" high, 20 1/2" overall width, 2 3/16" projection. Mounting hardware included. Finishes: Matte Black, Satin Nickel, Polished Chrome and Metallic Silver....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
existing conditions, additions and new construction Anti-slip surface serrations Key Specifications Floor to floor Movement: +/- 25% to +/- 50% Joint width...
-
GE® 27" Drop-In Electric Range JM250DFBB
Content  Weights and Dimensions Cooktop Width 27 1/8 in Approximate Shipping Weight 124 lb Cabinet Opening 27 in...
-
TotTurf® Synthetic Grass: Play Spaces
Pile Height: 1.5 inch Color(s): Field/Olive/Tan Roll Width: 15ft Infill recommended: Yes Primary Backing: TenCate K29 2-Ply Secondary Backing: SILVERBACK...
-
Handi-Ramp Concrete Deck Ramps
These wheelchair or scooter ramps are custom designed to meet your specific needs although standard width is 48 inches, with an almost unlimited number of custom widths available, length...
-
11B-216.12 Amusement rides
Signs shall comply with Section 11B-703.5 _|Signs; Visual Characters|_ and shall include the International Symbol of Accessibility complying with Section 11B-703.7.2.1....
