As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas....
Search Results "Built-Up Curb Ramp"
Filters
Commonly Searched Documents
-
Work Area Equipment
-
New Construction and Alterations
New Construction and Alterations Businesses whose facilities were built or altered since the ADA went into effect must comply with the ADA Standards for Accessible Design so that the...
-
10. Vertical Clearance at Exterior Stairs
10. ...are all exterior stairs built so blind persons and persons with low vision will not hit their head(s) on the underside (i.e.: protected with a cane detectable warning, such as the...
-
M14
Is the operating control (switch, lever, button, or pull) for each type of dispenser or built-in equipment no higher than 54 inches above the floor (if there is clear floor space for a parallel...
-
4.15.5(2)
(2) Free-standing or built-in units not having a clear space under them shall have a clear floor space at least 30 in by 48 in (760 mm by 1220 mm) that allows a person in a wheelchair to...
-
4.21.3 Seat
When seats were used in roll-in showers, built-in shower seats were typically omitted in favor of movable shower chairs or benches to provide more room and flexibility in accommodating people...
-
4.15.5(2)
(2) Free standing or built-in units not having a clear space under them shall have a clear floor space at least 30 in by 48 in (760 mm by 1220 mm) that allows a person in a wheelchair to...
-
FAQ: How many WorkGroups may I create or own?
Users with a Premium subscription may create or own up to 3 WorkGroups. User with an Accessibility Specialist subscription may create or own up to 12 WorkGroups....
-
Transfer Steps: ADA Standard Section 1009.5.4
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
1.1.10 Availability of codes
Each state department concerned and each city, county or city and county shall have an up-to-date copy of the code available for public inspection, See Health and Safety Code Section 18942...
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
§ 38.23(d)(1) Design load
Securement systems on vehicles with GVWRs of 30,000 pounds or above, and their attachments to such vehicles, shall restrain a force in the forward longitudinal direction of up to 2,000 pounds...
-
Gaps: ADA Standard Section 1002.4.3
EXCEPTION: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
§ 36.606(a)(2)
For example, if certain equipment is not covered by the code, the determination of equivalency cannot be used as evidence with respect to the question of whether equipment in a building built...
-
WORK AREA EQUIPMENT
As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas....
-
3. Element-by-Element Safe Harbor
The rule includes a general "safe harbor" under which elements in covered facilities that were built or altered in compliance with the 1991 Standards would not be required to be brought...
-
8. Residential Housing Offered for Sale to Individual Owners
For the first time, however, the final rule establishes design requirements for residential dwelling units built by or on behalf of public entities with the intent that the finished units...
-
Work Area Equipment
As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas subject to the Americans with Disabilities Act of 1990...
-
Technical Memorandum TM 2013-15 Baby Changing Tables
TM 2013-15 Baby Changing Tables Effective Date: June 1, 2013 2012 TAS Reference: 902 Baby changing tables are work surfaces based on Advisory 902.1; therefore, if fixed or built-in...
-
e-ii
Floor dimensions of at least 48 inches by 48 inches may be allowed in existing facilities built before the ADA went into effect....
-
H13
Is the operating control (switch, lever, button, or pull) of at least one of each type of dispenser or built-in equipment no higher than 54 inches above the floor (if there is clear floor...
-
§ 36.406(b) Scope of coverage.
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
5b.
Floor dimensions of at least 48 inches by 48 inches may be allowed in existing facilities built before the ADA went into effect....
-
[A] 101.3 Intent
strength, means of egress facilities, stability, sanitation, adequate light and ventilation, energy conservation, and safety to life and property from fire and other hazards attributed to the built...