Graphic conventions are shown in Table 1. Dimensions that are not marked "minimum" or "maximum" are absolute, unless otherwise indicated in the text or captions....
Search Results "Adjustable Height Exam Table"
Filters
Commonly Searched Documents
-
3.1 GRAPHIC CONVENTIONS
-
Clear Floor or Ground Space
Clear Floor or Ground Space At least one clear floor or ground space (30 inches by 48 inches minimum) must be provided at each location that has a railing height of 34 inches maximum....
-
Transfer Steps
Transfer Steps The maximum height of transfer steps is 8 inches, although shorter heights are recommended....
-
Public Postsecondary Schools
and need for the academic adjustment....
-
224.4 Guest Rooms with Communication Features
In transient lodging facilities, guest rooms with communication features complying with 806.3 shall be provided in accordance with Table 224.4....
-
F224.4 Guest Rooms with Communication Features
In transient lodging facilities, guest rooms with communication features complying with 806.3 shall be provided in accordance with Table F224.4....
-
407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with tactile symbols as shown in Table 407.4.7.1.3....
-
225 Storage
Where more classes of spaces are provided than the number required to be accessible, the number of spaces shall not be required to exceed that required by Table 225.3....
-
5.5.1 Armrest Provision for M302
5.5.1 Armrest Provision for M302 Description: Diagnostic equipment used by patients in a seated position such as exam chairs typically have armrests....
-
STEP 3
Table 240.2.1.2 requires a minimum of 1....
-
Urinal Flush Controls
The proposed rule specified a maximum height of 44 inches (the maximum height for obstructed forward reaches)....
-
Entry Points and Seats
When play components are located on an accessible route, the height required to transfer directly to the entry point or seat of a play component has a minimum of 11 inches (280 mm) and a...
-
704.11.1 Parapet construction
The height of the parapet shall not be less than 30 inches (762 mm) above the point where the roof surface and the wall intersect....
-
1132A.4.1 Thresholds
Changes in height at interior door thresholds (e.g., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm)....
-
2.3.3 Comparison of Dimensions with Standards and other Anthropometric Studies
• Seat Height, maximum: Compared to the vertical distance measured from the floor to the height of the seat support surface when occupied....
-
T304 Operable Parts
The technical requirements for operable parts include provisions on height, location, and operation....
-
ADA: Know Your Rights - Returning Service Members with Disabilities
traumatic brain injury or spinal cord injury, sustained hearing or vision loss, or are experiencing post traumatic stress disorder (PTSD) -- and now you're back in the States trying to adjust...
-
Pushbutton locator tone
The 2003 MUTCD requires that locator tone volume be carefully adjusted to be audible a minimum of 1.8 m (6 feet) and a maximum of 3.7 m (12 feet) from the pushbutton, or to the building...
-
407.4 Key Repeat (Section-by-Section Analysis)
Section-by-Section Analysis) This section proposes to require that, where a keyboard with a key repeat feature is provided, the delay before activation of the key repeat feature must be fixed at, or adjustable...
-
M306.1 General
Patients should not be required to adjust position to receive audible, visible, or tactile communications....
-
§ 38.159(c)(5) Slope
If the height of the vehicle floor from which the ramp is deployed is 3 inches (75 mm) or less above a 6 inch (150 mm) curb, a maximum slope of 1:4 is permitted; if the height of the vehicle...
-
Provisions
Provisions are the sections of accessibility guidelines and standards that explain what is required for specific situations and facilities (parking, picnic tables, trails, and so forth)....
-
§ 37.139(b)(1)
This includes maps and tables, if appropriate;...
-
Standing Supports (M304.3 and M305.3)
Standing supports that adjust from horizontal to vertical positions and at angles in between, such as a bar that folds up and locks into multiple positions, can be used....