Wheelchair spaces complying with 802.1 shall be provided in accordance with Table 221.2.1.1....
Search Results "Adjustable Height Exam Table"
Commonly Searched Documents
-
221.2.1.1 General Seating
-
Introduction
Using the coefficient of variation (CV) as the statistic to compare the degree of variability, Table 1 presents the differences for 11 variables....
-
7.4.6 Tread Obstacles
Tread obstacles on trails shall not exceed 2 inches (50 mm) in height measured vertically to the highest point. ...
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
1.1.7.3.1 Detached one- and two-family dwellings
Detached one- and two-family dwellings, lodging houses, live/work units, townhouses not more than three stories above grade plane in height with a separate means of egress, and their accessory...
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door. ◼...
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
D. Costs to Impacted Small Entities
Table 10 presents estimates of the percentage of movie theaters by venue type, calculated from the 2015 distribution of auditoriums by venue type (table 3-3 of the Final RA) and the average...
-
Tread Obstacles on Trails
Where the surface is paved or is built with boards, ensure tread obstacles do not exceed one-half inch (13 millimeters) in height....
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
To discuss the maximum base support height, the sub-committee looked at anthropomorphic data regarding footrest heights....
-
§ 38.53(d)(2) Exception
New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
-
§ 38.73(d)(2) Exception
New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
- Magnuson Group FLIP Brochure & Leaflet Holders
-
8.3 Results and Discussion
Tables 1 through 5 show the median ratings for each of the five listening conditions....
-
§ 38.95(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
§ 38.83(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
§ 38.125(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
Respect and appreciation for everyone - Inclusion is just the way we should think
Everybody can bring something to the table. When we understand and appreciate that, we all benefit. It's the right way to approach life....
-
Non-Tactile Signage
Non-Tactile Signage The legibility of printed characters is a function of the viewing distance, character height and proportion, font, and the color contrast between character and background...
-
11B-809.10.7.3 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. The backing shall 40 (sic) inches (1016 mm) minimum in length....
- Pressailt Care MATRIX ANGLE Wash Basin with Overflow Right-Facing with Integrated Handrail
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADAS] 703.5.7 Stroke Thickness....
-
Alteration
resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...