Removable, leak-proof, 1.2‑gal. (4.6-L) plastic receptacle. Rough Wall Opening: 11 1/4" W, 15 5/8" H, 4" min. depth (285 x 395 x 100mm)....
Search Results "Removable Base Cabinet"
Filters
Commonly Searched Documents
-
Bobrick ClassicSeries Recessed Sanitary Napkins Disposal B-353
-
Sennheiser GZR 2020 Trolley for TourGuide Receivers and Transmitters Charging Case
If folded the trolley is not longer then the case itself so the case can be put down without removing the trolley....
-
Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L). Patent Pending....
-
FAQ: How do I enter a New Document in my Corada WorkSpace?
This is used in rare cases where we need to alert users to something, such as ____ Click the blue 'Save Document' button - you have now created the base of your Document. ...
-
Section 36.201(b) (Preamble, Section-by-Section Analysis)
Some commenters raised specific questions as to how the barrier removal allocation would work as a practical matter....
-
Section 36.201(b) (Section-By-Section Analysis and Response to Comments)
Some commenters raised specific questions as to how the barrier removal allocation would work as a practical matter....
-
Lowered section for bar
Back in the day they were allowed in existing conditions but now removed from the code....
-
1. Movable aisle armrests
When carriers remove any of the old seats on existing aircraft and replace them with newly manufactured seats, half of the replacement aisle seats must have movable armrests....
-
ASI Global Partitions Plastic Laminate Partitions
Door Hinges Special driver installs fasteners which virtually eliminates unauthorized removal and ensures easy installation....
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Introduction
Subcommittee members felt that the definitions should be based on how the device is defined by manufacturer as follows: Manufacturers design examination tables with primary functions...
-
§27.127(e)(2)
All decisions are based on the hearing record and written findings shall be made....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
Signage
Recommendations: Signs should include appropriate messages based on the type of system provided, such as "Infrared Assistive Listening System Available -- Please Ask," "Audio Loop in Use...
-
Protruding Objects [4.4]
Requirements in 4.4 are based on standard cane techniques used by people with vision impairments. There are two principal techniques: the touch technique and the diagonal technique....
-
Steps to Minimize Significant Economic Impacts on Small Entities
The final rules permits exceptions to the specific provisions in the technical requirements for certain elements and facilities based on the conditions listed in Table 2 under Executive...
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Testing - Phase I & II
The first set of questions was fact-based and related to their tactile experience and recall of the interpretive information they had been provided at the beginning of the experiment....
-
Must elevator doors remain open for 20 seconds?
The opening time is further determined by the travel distance from hall call buttons and signal timing based on a 1.5 ft/s travel speed beginning from audible and visible signalization of...
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
1193.23(b)(4) (Advisory Guidance)
It is important to obtain input from persons or organizations with established expertise to ensure that input is not based merely on individual preferences or limited experience. 2....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
-
11B-411.2.1.2.1 Keypads
The dot shall have a base diameter of 0.118 inch (3 mm) minimum and 0.120 inch (3.05 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-217.4 TTYs
Separate requirements are provided based on the number of public pay telephones provided at a bank of telephones, within a floor, a building, or on a site....
