CONSTRUCTION STANDARDS (a) Within 60 days of the Consent Decree Date, HWI will submit all existing prototype building plans or designs currently in use to an ADA consultant approved by the United...
Search Results "Unit of Measurement"
-
20. DESIGN AND CONSTRUCTION STANDARDS
-
M303.2.4.2.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
-
Visible Signals: ADA Standard Section 407.2.2.2
Section 407.2.2.2 covers the current ADA Standards for elevator visible signals.
-
Identification: ADA Standard Section 502.6
Section 502.6 covers the current ADA Standards for parking space identification signs.
-
11B-604.9.6 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
11B-604.9.6 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
3 [§ 4.3.7]
Unlike the running slope, which runs along the ramp, the cross slope is measured across the ramp....
-
§104.35(b)(3)
student with impaired sensory, manual, or speaking skills, the test results accurately reflect the student's aptitude or achievement level or whatever other factor the test purports to measure...
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
Fixture shall withstand loadings up to 2,000 lbs. with no measurable deflection and loadings up to 5,000 lbs. with no permanent damage....
-
C. Technical standards for content validity studies
In the case of a selection procedure measuring a knowledge, skill, or ability, the knowledge, skill, or ability being measured should be operationally defined....
-
Examination Tables
Product data and unit costs were collected for examination tables produced by five manufacturers....
-
Sec.36.309(b)(1)(i)
impairs sensory, manual, or speaking skills, the examination results accurately reflect the individual's aptitude or achievement level or whatever other factor the examination purports to measure...
-
RECOMMENDATIONS
RECOMMENDATIONS An objective test procedure for measuring the firmness and stability of surfaces with a portable device and performance specifications need to be accepted in order to...
-
6.9 Tread Obstacles
Obstacles on beach access routes and their related resting intervals shall not exceed 1 inch (25 mm) in height measured vertically to the highest point....
-
Transits and construction lasers
Transits and construction lasers are useful for setting or measuring overall elevation points to determine a total slope....
-
Upper extremity cardio machine
I'm short, around 4'8", and with many UE cycles it seems like my nose and face are right up against the unit in order to be able to reach without causing shoulder or neck issues, which is...
-
Performance for Surface Firmness and Stability
The baseline measurements affirmed the RP was operable and calibrated....
-
Scoping for timeshare or condominium hotels. (Section-by-Section Analysis)
units not subject to the ADA....
-
Forward Approach: ADA Standard Section 704.2.1.2
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
2. Analysis of footrest clearance height and depth
Front castor and footrest measurements were available for 67 power wheelchair users (excluding front-wheel drives for this analysis, due to time constraints)....
-
Issue 4: Based on available references, can we develop “viable” design standards and guidelines”?
Must they be written in terms of measurable parameters and values? Consensus was not obvious. Must they be written in terms of measurable parameters and values?...
-
§104.42(b)(3)(i)
handicap that impairs sensory, manual, or speaking skills, the test results accurately reflect the applicant's aptitude or achievement level or whatever other factor the test purports to measure...
-
§ 36.309(b)(1)(i)
impairs sensory, manual, or speaking skills, the examination results accurately reflect the individual´s aptitude or achievement level or whatever other factor the examination purports to measure...
