A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow....
Search Results "Multifamily Housing Project (HUD 504)"
-
Allegion Falcon 1690 Series Exit Devices
-
Appendix 4 – References
Project report on the field testing of the Australian standard 1428-1977 part 1—Recommended amendments and index to part 2 detailed reports. ...
-
Assembly Area
these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers, motion picture houses...
-
F202.6.2 Accessible Route
Primary function areas, as defined by Administrator of the General Services Administration, the Secretary of Defense, the Secretary of Housing and Urban Development, and the United States...
-
F232.5.1 Cubicles and Counters
EXCEPTION: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with F232 shall not be required...
-
232.5.1 Cubicles and Counters
EXCEPTION: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with 232 shall not be required...
-
Customer Premises Equipment (CPE)
convergence products, home networking adaptors and Internet access gateways which enable consumers to access communications service providers’ services and distribute them around their house...
-
Marc Dubin, Esq.
I served as a Senior Trial Attorney in the Disability Rights Section of the Justice Department, responsible for nationwide enforcement of the ADA and Section 504 on behalf of the United...
-
Where do I measure for a handrail extension?
A building official on a new construction project that we were consulting for raised a question regarding where to measure the handrail extension at the top of a stair. ...
-
FAQ: What are "Corada WorkGroups?"
This is a new and exciting feature within the Corada WorkSpace that allows users to create "WorkGroups" to use individually; or, users can invite staff, project team members, colleagues,...
-
Omnia Industries Inc. Interior Modern Lever Latchset with Square Rose - Stainless Steel No.25S
Interior Modern Lever Latchset with Square Rose - Stainless Steel Dimensions: 2-5/8" Projection x 5-3/8" Length, 5/8" Lever Diameter Rose: 2-3/8" Square x 7/16" Projection Finishes...
-
Bradley High Capacity Towel Dispenser 247
Satin Finish Stainless Steel Holds 1000 single-fold, 800 multi-fold or 500 C-fold paper towels Model 247 - Recessed Model 247-10 - Semi-recessed (recesses 3-1/2"; projects...
-
Bradley Low Capacity Towel Dispenser / 2 Gallon Waste Receptacle 2291
Stainless Steel Holds 475 multi-fold or 350 C-fold paper towels 2 gallon waste capacity Model 2291 - Recessed BradEX Model 2291-10 - Semi-recessed (recesses 2"; projects...
-
Handrail Extensions
ADAAG does not require handrails on sloped surfaces that have a rise of less than 6 inches or a projection less than 72 inches, or a slope of 1:20 (5%) or less....
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
502.4 Floor or Ground Surfaces
Built-up curb ramps are not permitted to project into access aisles and parking spaces because they would create slopes greater than 1:48....
-
Will CALGreen be amended to require that some parking spaces are designed so that they can comply with Chapter 11B requirements when converted to EV charging spaces (i.e. slope, vertical clearance, path of travel)?
While the California Green Code nonresidential mandatory measures require projects to identify an EV space, provide an electrical raceway to the service panel, and provide adequate capacity...
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
Stacks [8.5]
Stacks [8.5] Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more...
-
Attachment B
the Consent Decree: Description of Element: Location of Element: ____________________ Date __________________________________ Signature of Independent Licensed Architect Project...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
Bradley Medium Capacity Towel Dispenser 2447
Contemporary Series - Satin Finish Stainless Steel Holds 800 multi-fold or 500 C-fold paper towels Model 2447 - Recessed Model 2447-10 - Semi-recessed (recesses 1-5/8"; projects...
-
232.5.1 Cubicles and Counters
EXCEPTION: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with 232 shall not be required...
-
Vibrotactile WALK indications
Vibrotactile WALK indications Vibrotactile indications are transmitted by a vibrating plate or arrow on the housing of the pedestrian pushbutton....
